Table of Contents Table of Contents
Previous Page  1398 / 1562 Next Page
Information
Show Menu
Previous Page 1398 / 1562 Next Page
Page Background

9/6

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).

9

Soldering/Welding/

Workshop Equipment

Explosion-proof torches

In potentially explosive areas appropriately

protected lamps must be used in order not

to trigger an explosion, for example, from the

spark when turning on the lamp.

Therefore the ATEX directives define the

following zones:

Zone 2:

Areas where only

rare and short

explosion danger exists.

Zone 1:

Areas, in which

occasionally

explosion danger exists.

Zone 0:

Areas, in which

continually or

frequently and over a long time

period

explosion danger exists.

On each light there should be a code, which

provides information about the application

area:

II

Group II devices must not be used

in mining.

1|2|3

Specifies the category, this

corresponds to the zone +1.

G|D

Suitable for gases/vapours (G) or

dust (D).

Ex

For use in potentially explosive areas.

ia|ib

Protection class intrinsic safety.

e

Ignition protection: increased safety.

IIx

Gas group (IIA = propane, IIB =

ethylene, IIC = acetylene/hydrogen).

IIIx

Dust group (IIIA = combustible

suspended matter, IIIB = no conductive

dust, IIIC = conductive dust).

Tx

Temperature class, specifies the

maximum allowable surface

temperature. (T6 = 85 °C, T5 = 100 °C,

T4 = 135 °C, T3 = 200 °C,

T2 = 300 °C, T1 = 450 °C)

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and

impact-resistant polycarbonate with clip, non-conductive. The rubberised rear switch for

single-hand operation is hermetically sealed against the penetration of water and dust. Optimal

illumination at close range and

distances up to 35 m.

There is also protection against short

circuit and incorrectly inserted batteries. ATEX Zone 1, certified, II 2G Ex ib IIB T4 Gb, working

temperature -20 °C to +40 °C . Supplied with 2 AAA/LR03 micro batteries.

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and

impact-resistant polycarbonate, non-conductive. The rubberised rear switch for single-hand

operation is hermetically sealed against the penetration of water and dust. Optimal illumination

at close range and

distances up to 150 m.

There is also protection against short circuit,

the batteries can be inserted regardless of their polarity.

ATEX Zone 1 certified, II 2G Ex ib

IIB T4 Gb, II 2D Ex ib IIIC T 105°C Db, working temperature -20 °C to +40 °C. Supplied with

4 Mignon batteries AA/LR06.

Note:

Compatible with popular headbands.

Design:

Waterproof safety lamp made of highly resilient and impact-resistant polycarbonate

with clip, non-conductive. The rubberised rear switch for single-hand operation is hermetically

sealed against the penetration of water and dust. Optimal illumination at close range and

distances up to 100 m.

There is also protection against short circuit and incorrectly inserted

batteries. ATEX Zone 2, conforms to II 3G Ex nA IIC T4. Supplied with 2 Mignon batteries

AA/LR06.

Design:

Certified gas-, dust- and waterproof safety lamp made of highly resilient and

impact-resistant XAG plastic, conductive at high impedance. Additional protection against

electrostatic discharge (ESD), electromagnetic interference (EMI) and radio frequency

interference (RFI). The rubberised rear switch for single-hand operation is hermetically sealed

against the penetration of water and dust. Optimal illumination at close range and

distances

up to 150 m.

There is also protection against short circuit,

the batteries can be inserted

regardless of their polarity.

ATEX Zone 0 certified, II 1G Ex ia IIC T4 Ga, II 2D Ex ib IIIC T

105°C Db, working temperature -20 °C to +40 °C . Supplied with 4 Mignon batteries AA/LR06.

Note:

Compatible with popular headbands.

Order

No.

Dimensions

mm

9054

Lighting duration

h

Luminosity

lm

Light bulbs

Weight

g

0201

143 x 19

23.90

ca. 10

30

LED

40

(596)

Order

No.

Dimensions

mm

9056

Lighting duration

h

Luminosity

lm

Light bulbs

Weight

g

0201

167 x 38

44.00

Min. 15 – max. 50

120

LED

170

(596)

Order

No.

Dimensions

mm

9059

Lighting duration

h

Luminosity

lm

Light bulbs

Weight

g

0051

154 x 24

24.90

Min. 12 – max. 50

60

LED

80

(596)

Order

No.

Dimensions

mm

9059

Lighting duration

h

Luminosity

lm

Light bulbs

Weight

g

1000

167 x 38

57.60

Min. 15 – max. 50

120

LED

170

(596)

Torch PX2

Torch PX1

LED torch PX3

LED torch PX0

IP 68

IP 68

IP 68

IP 68

m

Torches

1398