411 / 1562
2/165
Articles marked ◊ are not held in stock, procurement is effected at short notice.
2
Cutting Tools
CNC
Design:
Body made of tempered steel. The special surface hardening guarantees increased
wear resistance. Thanks to the carbide bushings higher speeds, faster machining and an impro-
ved tool life are achieved. In addition, the tool has a modular design which allows it to be used
universally as a right and left version.
Conversion is simply by turning the knurling head. The
clearance angle is set using the set screws on the shaft, fine adjustment for straight knurling
using the adjustable knurling head. Retooling times are reduced considerably through precise
positioning of the cut knurling head using the scale, simple pre-adjustment and reproducible
setting parameters. Supplied without cut knurling wheel.
Application:
For cut knurling (chip removal).
Can be used for feed knurling. The tool can be used for knurling on the workpiece according to
DIN 82: RAA, RBL, RBR.
Knurled wheels:
RAA
–1 piece BL 30° (for use on the left)/
1 piece BR 30° (for use on the right)
RBR 30° –1 x AA
RBL 30° –1 x AA
Machine type:
Swiss type autolathes and small lathes –CNC and conventional –centre height
is integrated in the tool holder.
Cut knurling tool (tool only)
CNC
Order
No.
Model
2952
Working area ∅
mm
Shank
mm
shank length
mm
Knurl required
mm
0151
951-12 R 100306
344.00
2–15
12 x 12 98.5
10 x 3 x 6
(270)
Design:
Body made of tempered steel. Supplied without cut knurling wheel.
Application:
For cut knurling (chip removal).
Can be used for feed knurling. The tool can also be used for knurling on the workpiece accor-
ding to DIN 82: RGE 30° and RGE 45°.
Knurling wheels:
RGE 30°: 2 x AA
RGE 45°: 1 x BL 15°/1x BR 15°
Machine type:
Swiss type autolathes and small lathes –CNC and conventional –centre height
is integrated in the tool holder.
Cut knurling tool (tool only)
Order
No.
Model
2952
Working area ∅
mm
Shank
mm
shank length
mm
Knurl required
mm
0155
241-12 M 150408
634.50
3–50
12 x 12 114
15 x 4 x 8
(270)
CNC
Design:
Body made of tempered steel. The special surface hardening guarantees increased
wear resistance. Thanks to the carbide bushings higher speeds, faster machining and an impro-
ved tool life are achieved. In addition, the tool has a modular design which allows it to be used
universally as a right and left version.
Conversion is simply by turning the knurling head. Ret-
ooling times are reduced considerably through simple pre-adjustment and reproducible setting
parameters. The tool also has a fine adjustment feature for positioning the cut knurling head for
a constant knurling depth, a setting spindle and a setting scale. Synchronous setting of the knurl
holding unit to the workpiece diameter is done using the central setting screw. Supplied without
cut knurling wheel. Modular design: Adaptation of the shank sizes by means of adapter angle.
Application:
For cut knurling (chip removal).
Can be used for feed knurling. The tool can be used for knurling on the workpiece according to
DIN 82: RGE 30°, RGE 45°.
Knurled wheels:
RGE 30° –2 pieces AA
RGE 45° –1 piece BL 15°/1 piece BR 15°
Machine type:
Lathes and automatic lathes –CNC and conventional –centre height is integra-
ted in the tool holder.
Cut knurling tool (tool only)
Order
No.
Model
2952
Working area ∅
mm
Shank
mm
shank length
mm
Knurl required
mm
0130
231-10 M 150408
384.00
3–50
10 x 10 99
15 x 4 x 8
0135
231-12 M 150408
384.00
3–50
12 x 12 99
15 x 4 x 8
0140
231-16 M 150408
384.00
3–50
16 x 16 99
15 x 4 x 8
(270)
Order
No.
For shank sizes
mm
2952
0510
10 x 10
50.30
0512
12 x 12
50.30
0516
16 x 16
50.30
(270)
Adapter bracket
Cut knurling tools
411