Catalog FORMAT plus - EDE 2015 - 2017

770 / 1562

4/42
Digital inside micrometers
Design: Measuring faces made of hardened steel for measurement
range 3.5–12 mm, from 11–100 mm TiN-coated, measurement range
100–300 mm carbide-tipped. Digit height of the LCD 7 mm. Supplied
with battery CR 2032, 3 V, in plastic case.
Function: mm/inch-conversion, automatic switch-off after 10 minutes,
display setting is retained, reset (zeroing) possible in any position,
blocking of display. Data output Opto RS 232.
Note: Replacement battery (Order No. 4027 2032, Ç 4/12).
Data cable Opto RS 232 (Order No. 4025 0005, Ç 4/12).
Other sizes available on request.
Order
No.
Measure-
ment range
mm
4168 Reading
mm
Error
limit
µm
A
mm
B
mm
C
mm
0001 3.5– 4.0 1292.00 0
0003 4.0– 4.5 1292.00 0
0005 4.5– 5.5 1292.00 0
0007 5.5– 6.5 1292.00 0
0009 6.0– 8.0 1044.00 0
0011 8.0–10.0 1052.00 0
0013 10.0–12.0 1062.00 0
0015 11.0–14.0 1066.00 0
0017 14.0–17.0 1072.00 0
0019 17.0–20.0 1075.00 0
0021 20.0–25.0 1084.00 0
0023 25.0–30.0 1096.00 0
(495)
Order
No.
Measure-
ment range
mm
4168 Reading
mm
Error
limit
µm
A
mm
B
mm
C
mm
0025 30.0– 35.0 1112.00 0
0027 35.0– 40.0 1124.00 0
0029 40.0– 50.0 1164.00 0
0031 50.0– 60.0 1183.00 0
0033 60.0– 70.0 1217.00 0
0035 70.0– 80.0 1241.00 0
0037 80.0– 90.0 1267.00 0
0039 90.0–100.0 1292.00 0
0041 100.0–125.0 1739.00 ◊ 0
0043 125.0–150.0 1757.00 ◊ 0
0045 150.0–175.0 1978.00 ◊ 0
0047 175.0–200.0 1996.00 ◊ 0
(495)
Digital three point inside micrometer IMICRO capa µ system
Design: Supplied in plastic case.
Note: Further set combinations > 100 mm available upon request.
Order
No.
Measurement range
mm
4168 Set contents
0060 6– 12 3182.00 3 individual devices, 6–8 mm, 8–10 mm and 10–12 mm
2 adjusting rings, 8 and 10 mm
1 extension, 100 mm
0063 11– 20 3285.00 3 individual devices, 11–14 mm, 14–17 mm and 17–20 mm
2 adjusting rings, 11 and 17 mm
1 extension, 150 mm
0066 20– 40 4488.00 4 individual devices, 20–25 mm, 25–30 mm, 30-35 mm and 35–40 mm
2 adjusting rings, 25 and 35 mm
1 extension, 150 mm
0069 40–100 8023.00 6 individual devices, 40–50 mm, 50–60 mm, 60–70 mm, 70–80 mm, 80–90 mm and 90–100 mm
3 adjusting rings, 50, 70 and 90 mm
1 extension, 150 mm
(495)
Digital three point inside micrometer
set IMICRO capa µ system
DIN
863
IP 54
TESA
calibration
certificate
opto
RS232
All stocked articles available within 24 hours by UPS Express. All prices excluding VAT per piece (if not stated otherwise).
4
MeasuringEquipment
770