804 / 1562
4/76
Small gauges/thickness gauges
ISO tolerance key
Tolerator.
For reading all tolerance values.
Convertor
Filetor
Tolerator
Order
No.
Design
4482
Dimensions
mm
0001
Tolerator
60.60
60 x 30 x 110
0002
Filetor
60.60
60 x 30 x 110
0003
Convertor
60.60
60 x 30 x 110
(447)
Measurement convertor
Convertor.
For converting mm to inches and vice versa.
0003
4482
ISO thread display
Filetor.
For reading all determinations of a thread.
0002
4482
0001
4482
Display device
Order
No.
Dimensions
mm
4481
0001
260 x 50
16.30
(447)
Design:
Made of aluminium, anodised, deep black print, sealed against scratches, with tables
on the front and back for ISO metric thread (DIN 13), Whitworth thread (DIN 11), Whitworth
pipe thread (DIN 259).
Application:
For direct reading of all major theoretical thread dimensions as well as the wedge
width, the wedge height and the shaft and hub groove depths for 10–500 mm shaft ∅.
DIN thread slide
Bestell-
Nr.
Blatt-
zahl
4483
4485
4487
Messbereich mm
Blattlänge
mm
0008
8
1,88
–
–
0,05–0,5 bis 0,3 mm um 0,05 mm, darüber um 0,1 mm steigend
100
0013
13
2,42
–
–
0,05–1,00 bis 0,3 mm um 0,5 mm, darüber um 0,1 mm steigend
100
0013
13
–
–
13,30
0,05–1,00 bis 0,3 mm um 0,05 mm, darüber um 0,1 mm steigend
300
0020
20
4,10
17,25
–
0,05–1,00 um 0,05 mm steigend
100
0020
20
–
–
19,80
0,05–1,00 um 0,05 mm steigend
300
0021
21
7,45
–
–
0,05–2,00 bis 0,1 mm um 0,05 mm, darüber um 0,1 mm steigend
100
(447)
(447)
(447)
Application:
For inspecting intermediate spaces, contact distances etc.
Ord r
o
Number
of blades
Measurem nt range mm
Blade le th
1.88
0.05–0.5 to 0.3 m by 0. 5 m , above this increasing by 0.1 mm
.42
0.05–1.0 to 0.3 m by 0.5 m , above this increasing by 0.1 mm
13.30
0.05–1.0 to 0.3 m by 0. 5 m , above this increasing by 0.1 mm
4.10
17.25
.
1. increasing by 0.05 mm
19.80
.
1. increasing by 0.05 mm
7.45
0.05–2.0 to 0.1 m by 0. 5 m , above this increasing by 0.1 mm
Feeler gauge
4483
Sensor gauge.
Blades made of hardened spring steel, individually labelled with the
size, conically tapering in high-gloss nickel-plated shell, with locking nut.
4485
Feeler gauge, antimagnetic.
Blades made of brass, individually labelled with the
size, conically tapering, with locking nut.
4487
Piston clearance gauge.
Blades made of spring steel, individually labelled with the
size, conically tapering, with locking nut.
4487
4485
4483
Order
No.
Dimensions
mm
4480
0001
280 x 80
20.40
(447)
Design:
Made of aluminium, anodised, deep black print, sealed against scratches, with tables
on the front and back.
Application:
For direct reading of standard bore holes H6 to H13 acc. DIN 7154
from 1–160 mm ∅ and standard shafts h5 to h12 acc. to DIN 7155 from 1–160 mm ∅.
ISO tolerance slide
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
804