932 / 1562
5/62
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
5
Hand Tools
Design:
All loaded parts made of special grade,
chromium-vanadium steel, hardened and tempered
in oil.
Burnished head.
Handles with multi-compo-
nent plastic covers for single- and double-handed
operation. Safe and dirt-proof storage of the inter-
changeable inserts in the round magazine with
belt clip. High crimping quality thanks to precision
profiles and locking device. Crimping profiles can be
changed without any tools. Precise pre-set crimping
pressure.
Application:
Pliers and quick-change magazine for
standard crimping requirements in various crimping
profiles. Choice of versions for 3 or 5 crimping
profiles.
Order
No.
Conductor cross-section
mm
2
5511
Application
Processing
Length
mm
0003
0.50– 6.0
0.50– 6.0
0.25– 6.0
166.50
Uninsulated, open connector
insulated cable lugs and shock connector
ferrules
From the side
250
0005
0.50– 6.0
0.50– 6.0
0.25– 6.0
0.50–10.0
1.50–4.0 + 6.0 + 10.0
217.00
Uninsulated, open connector
insulated cable lugs and connector
ferrules
uninsulated cable lugs and connector
uninsulated shock connector
From the side
250
(525)
Crimping pliers with MultiCrimp
®
interchangeable magazine
5511 0003
5511 0005
Design:
Made of special tool steel, hardened and tempered in oil.
Polished head.
With 9 especially deep crimping recesses and conical sides. Handles with multi-component
plastic covers, with recess and indented lettering,
insulated up to 1000 V in line with
IEC 60900, DIN EN 60900, VDE 0682/Part 201.
Application:
For the reliable pressing
(crescent pressing)
of ferrules according to DIN 46228
(Parts 1 + 4), with plastic collars.
Order
No.
Conductor cross-section
mm
2
5513
Length
mm
0005
0.25–16
28.70
180
(525)
VDE crimping pliers for ferrules, crescent profile
Design:
Made of special tool steel, hardened and tempered in oil.
Polished head,
handles
covered with plastic.
Application:
For the reliable pressing of ferrules in line with DIN 46228 (Parts 1 + 4), with
plastic protective cover. Ideal for working in hard-to-access areas, e.g. in narrow and deep
control boxes.
Order
No.
Conductor cross-section
mm
2
5504
Length
mm
0005
0.5–6
34.50
180
(525)
Crimping pliers for ferrules, with front insertion
Design:
Pliers made of steel, handles with multi-component plastic covers.
Application:
For the pressing
(trapezoid pressing)
of ferrules in line with DIN 46228 (Parts 1 + 4),
with and without plastic protective cover.
Order
No.
Conductor cross-section
mm
2
5518
Processing
Length
mm
0005
0.5– 6
71.10
From the side
205
0010
6.0–16
71.10
From the side
205
(512)
Crimping pliers for end sleeves
5518
With
five
crimping zones.
0005
5518
With
three
crimping zones.
0010
5518 0010
5518 0005
m
Crimping pliers
932