New Litrature 9-17-07.pub

10 / 40

10
C YLINDRICAL RING GAGES
• Pictured above is a “Jacketed Car-
bide” ring.bide” ring.
• The insert is solid Carbide with the
outside jacketed with Steel.
• A solid Carbide ring would be
heavy and subject to damage on the
outside due to the carbide being
hard and brittle.hard and brittle.
SMALL RING LARGE FLANGED RING GAGES
• Above 1.510” cylindrical rings are manu-cal ri
factured with a flanged diameter as pic-
tured above.
• The removal of excess material from the
outside diameter reduces weight for eas-
ier use by the operator.
• Available in Steel, Carbide or Chrome.ailabl
.010” TO 1.510”
>1.510”
• The designs for cylindrical
ring gages are described in
ASME standard B47.1.
• Rings below 1.510” are
manufactured without a
flanged outer diameter.
• Available in Steel, Carbide or
Chrome.
• All cylindrical Rings are manufactured to ASME/ANSI B47.1 AGD standard and ASME/ANSI
B89.1.6.
• Rings made from Tool Steel heat treated to Rc 58-62.
• When Min and Max master rings (.005”/.125mm max spread) are ordered for setting variable
gages, the quantity two price may be used.
• All rings regardless of size are lapped to size and polished.
• Non gaging surfaces are black oxide and ring faces are surface ground.
• Roundness and taper not to exceed 50% of the applicable gagemaker’s size tolerance and
are non-accumulative.
• Sizes available up to 28”
JACKETED CARBIDE RING GAGES
• Segmented gages are an alternative to standard Ring and Disc masters. They
are used in setting swing and bore gages. Segmented gages are lighter and
use less storage room than standard ring and disc masters. They are made to
check one or multiple diameters.
• Segmented ID and OD gages are ground square to faces within .0002". Toler-
ances depending on size are +/- .0005" with either class X or XX geome-
try. Measurement uncertainty is within .00006" up to 21.000". The exact size
can be engraved on the gage making it easier for set up. Segmented gages are
made out of Tool Steel and heat-treated to Rc 58-62.
• Chrome is available upon request.
SEGMENTED GAGES