400021 400ml 2:1 Dual Cartridge
400021 Dual Cartridge System 400ml 2:1 Ratio
Moulded from high density materials, these dual ratio component cartridges provide a safe and reliable method of filling and dispensing most two-part materials in a 2:1 mix ratio by volume. Cartridges feature a bell mouth push on mixer with nozzle attachment. Pistons are air-bleed vented type with a cap to seal once inserted. Cartridges supplied with dual pistons and a tip cap seal which is removed when attaching the static mixer nozzle. Typical Applications Use these cartridges for two component adhesives, gels, pastes, silicones, sealants, epoxies, and PU’s. Once filled with material, cartridges can be used with standard manual and pneumatic dispensing guns.
400ml/cc Total 2:1 By Volume Up to 100 psi
Max Fluid Pressure
High Density Polypropylene
Cartridges are supplied in packs of 50 or bulk packs of 500.
Pricing and Lead Times
Our cartridges are competitively priced whether in a single box of 50 or in bulk packs. We hold extensive stocks and can ship for fast deliveries. Options Part BG400-1 400ml Manual Gun 2:1 Ratio Part CG400-2 400ml Pneumatic Gun 2:1 Ratio Part MC06-18 Mixer Nozzle 6mm ID x 18 Element Part MC08-24 Mixer Nozzle 8mm ID x 24 Element Part MC10-32 Mixer Nozzle 10mm ID x 32 Element Part MC13-24 Mixer Nozzle 13mm ID x 24 Element
Health & Safety in Use
Cartridges are safe and hygienic, leak free so reducing risk of operator contact with the materials being dispensed. Use up to 100 PSI maximum air pressure.
Supplied with Dual Pistons and Caps High Density Safe to 100 psi Pressure 2:1 Mix Ratio by Volume Silicone Free Moulded Plastics Use with Manual or Pneumatic Guns Low Draft Internal Taper Design 13mm Retaining Nut Included
The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user because of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.
Adhesive Dispensing Limited, 55 Alston Drive, Bradwell Abbey, Milton Keynes, Buckinghamshire, MK13 9HB, UK Tel. +44 (0) 1908 686660 Fax. +44 (0) 1908 686836. firstname.lastname@example.org www.adhesivedispensing.co.uk Registered in England 6048283. VAT GB 901 859421
Made with FlippingBook - Online catalogs