neocube Operating and installation instructions - model S

9

Attaching the lower ceramic element

A bolt with a nut has been pre-mounted on the right and left insides (at the rear) of the cover elements. In the mounted state, this fits in a bracket which is used to attach the cover element by tightening the nut. When the element is correctly positioned, on the inside of the reverse side, screw down the bolts on the right and left side of the rear panel.

10

Installing the upper ceramic element

Carefully lift the upper ceramic element onto the base plate and push back evenly. Position it so that the ele- ment is flush with the frame to the left, right and front.

11

Attaching the upper ceramic element

A bolt with a nut has been pre-mounted on the right and left insides (at the rear) of the cover elements. In the mounted state, this fits in a bracket which is used to attach the cover element by tightening the nut. When the element is correctly positioned, on the inside of the reverse side, screw down the bolts on the right and left side of the rear panel.

12

Installing the steel rear panel

After both cover elements have been mounted and fi- xed in place, the steel rear panel can be screwed back onto the heating element using the four Allen screws.

neocube S – Operating and installation instructions

14