neocube Operating and installation instructions - model S

11. Maintenance

Maintenance work must only be carried out after the wood-burning stove has completely cooled down.

General Maintenance work must only be carried out when the wood-burning stove is cold. A minimum of daily maintenance/cleaning of the wood-burning stove is required. It is best to use a vacuum cleaner with a small mouthpiece and a soft brush to vacuum the outside of the wood-burning stove or clean it with a soft, dry cloth or soft duster. You can also dust the wood-burning stove with a soft, dry cloth or a soft hand brush. But remember only to do so when the stove is cold. Do not use water, alcohol or any cleaning agents as this will damage the paint. Maintenance The wood-burning stove should undergo a thorough inspection at least every two years. The inspection includes: • Thorough cleaning of the wood-burning stove. • Checking the gaskets and replacing them if damaged or no longer soft. • Checking the firebrick lining in the combustion compartment. • Checking the design type (only in certain countries). • Checking the bottom of the combustion compartment. • Hinges and locking hooks must be lubricated with copper grease (heat-resistant up to 1100°C)..

Maintenance must be carried out by a qualified installer. Only use original replacement parts.

neocube S – Operating and installation instructions

21