ADL810 Analog Dispenser
Pneumatic benchtop dispenser for glues & pastes Adhesives Glues Pastes Silicones Solvents Paints Grease Epoxies Primers
The ADL810 is a cost-effective analog timed air powered dispenser. It’s light weight and compact size makes this the ideal bench top solution for all your gluing, solder paste application and most other fluids. Its simplified construction and operation makes it an ideal replacement to squeeze tubes, bottles, brushes and syringes The ADL810 comes with two modes; manual/pre-set timer. By setting the timer, repeat deposits can be made from small dots to big shots. Press the steady mode and it will make continuous beads. Features vacuum suck-back to stop drips of watery liquids. Supplied complete with a syringe barrel as- sortment, needle tip kit assortment, adapter assem- bly, foot switch, power cord and user guide. It is CE certified. 220V or 100V power adapter versions Covered by a 1 year warranty. This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up. This compact dispenser sits on the bench and uses an air input from any compressor or factory mains supply. Supplied with airline hose and fittings kit to make connection easy. Ready to use out of the box.
ADL810 - 220V or ADL810E - 110V Timer: 0.01 - 30 seconds Output Pressure: Up to 100 psi Input Pressure: 80-100 psi Cabinet Size: 195 x 216 x 60 mm Weight: 2.5 kg Input Voltage: 110 or 220 V AC option Cycle Rate: Up to 600 cycles/minute Timing Repeatability: ±0.1% Meets or Exceeds: CE Certified Warranty: 1 Year
www.adhesivedispensing.net firstname.lastname@example.org Tel. +44 (0) 1908 686660
Made with FlippingBook