Feuling Catalogue M8 Parts

FEULING ®

MILWAUKEE-EIGHT ® PARTS & KITS

CAMSHAFT INSTALLATION KIT

MILWAUKEE-EIGHT camshaft installation kits include all needed gaskets, O-rings, cam bearing and fasteners to change the camshaft using one piece pushrods. Includes the following gaskets: top rocker cover, cam cover, lifter blocks, exhaust. O-rings: pushrod tubes, camplate, breather assemblies. ARP ® cam/crank bolts and washers and a Timken ® / Koyo ® inner cam bearing. WARNING: Due to the unstable nature of this 4 valve engine design with 1 rocker arm activating 2 valve springs FEULING highly recommends running one piece pushrods over quick install adjustable rods to maintain maximum cam/valve lift and reduce valvetrain harmonics and hydraulic lifter issues. See FEULING HP+ Pushrods #4087 ( RSS # FE-4087 )

PART #2030 RSS #FE-2030

Quick change/top end install kit: Gasket kit #2052, Inner cam bearing #2080, Cam/Crank bolts & washers #3042 RECOMMENDED PART: #4087 ( RSS #FE-4087 )

FEULING supplies the best bearings available, our inner cam bearings are heavy duty full complement style designed to accept the higher loads and demands of performance engines. INNER CAM BEARING

PART #2080 RSS #FE-2080

Koyo ® Torrington ®

Inner Cam Bearing (full needle bearing). (Qty. 1)

PMS: Process Black RGB: R-0, G-0, B-0 CMYK: C-30 M-30, Y-30, K-100

26 00, K-0

• • Top engine builders demand quality fasteners! Secure your engine with complete confidence • Superior strength and performance to any other cylinder stud head bolt kit on the market, this kit is designed to exceed the needs of high performance engines • Don’t Risk Head Gasket Failure! • Stock Cylinder studs are designed as a stretch to torque stud with a one time use only lifespan • FEULING studs are installed to a torque spec, can be reused and carry a lifetime warranty • Heat-treated 8740 chrome Moly steel studs, 190,000+ psi tensile strength, precision j-form threads for optimum engagement to prevent galling and promote more consistent torque loading • Head bolts are manufactured from a special 300 alloyed corrosion resistant stainless steel with tensile strength rated @ 180,000 psi • Manufactured by ARP to FEULING exact specifications • Recommended for all V-Twin engines • Stock replacement • Made in the U.S.A. FEULING ® x ARP ® CYLINDER STUD & HEAD BOLT KITS

um size is 1.75 in. wide. If a smaller logo is required see “Special Useage on second page of this doc. The strongest studs & bolts available!

PART #3024 RSS #FE-3024

8 cylinder studs, 8 head bolts, Moly assembly lubricant, and thread sealant.

(07) 3252 5381