Feuling Catalogue M8 Parts

FEULING ®

MILWAUKEE-EIGHT ® PARTS & KITS

CAMPLATE BLOCK OFF PLATE KIT

When installing gear drive cams into a Milwaukee Eight or late model Twin Cam engine the oil feed hole for the hydraulic cam chain tensioner in the camplate must be blocked off. This kit has the required components for both engines.

PART #8016 RSS #FE-8016

FITS: MILWAUKEE-EIGHT‘17-’18 and Twin Cam ‘07-’17 including ‘06 Dyna engines

FEULING machined steel, stock replacement roller chain drive sprockets fit ‘07-’16 Twin Cam ® and MILWAUKEE-EIGHT engines as direct replacements and work on early ‘99-’06 engines when upgrading to the hydraulic cam chain tensioners using the roller chain. FEULING crank sprockets are designed with a tighter tolerance on the ID for better fit to the pinionshaft. crank sprocket

PART #1091 RSS #FE-1091

17 tooth crankshaft sprocket. Replaces OEM # 25673-06

Stock replacement primary roller chain, 22 Link, connects the camshaft sproket to crankshaft sproket. CAM CHAIN

PART #8061 RSS #FE-8061

22 LINK, MILWAUKEE-EIGHT Stock Replacement. Also Fits: ‘07-’17 Twin Cam , including ‘06 Dyna.

PMS: Process Black RGB: R-0, G-0, B-0 CMYK: C-30 M-30, Y-30, K-100

26 00, K-0

Camshaft sprocket spacing alignment/thrust washer kit. Alignment washers are used to align the rear camshaft sprock t with the crank sprock t to achieve correct chain alignment. KIT INCLUDES: Front cam thrust washer 0.100”, rear cam sprocket alignment washers 0.110”, 0.120”, 0.130”, 0.140”, 0.150” CAM SPROCKET THRUST WASHERS MILWAUKEE-EIGHT stock replacement. Also Fits: ‘07-’16 Twin Cam engines, including 2006 Dyna as stock replacement and conversion camshafts when upgrading to hydraulic tensioner setup on ‘99-’06 engines.

um size is 1.75 in. wide. If a smaller logo is required see “Special Useage on second page of this doc.

PART #8041 RSS #FE-8041

A set of precision ground steel balls to accurately measure lifter bore diameter and bore roundness. Feuling recommends a lifter to lifter bore clearance of 0.001” - 0.0015” for optimum lifter performance. SIZES : 0.8430”, 0.8435”, 0.8440”, 0.8445”, 0.8450” Lifter bore measuring kit

PART #9004 RSS #FE-9004

MILWAUKEE-EIGHT lifter bores. Also Fits: EVO and Twin Cam

(07) 3252 5381