Feuling Catalogue M8 Parts

FEULING’s REAPER camshafts have wide lobe separations producing rideable power bands. Smooth camshaft lobe ramps are easier on valvetrain components eliminating excessive valvetrain noise and wear. • Better Throttle Response • Increased MPG • Unique Idle Sound • Made in U.S.A. • Easy Starting MILWAUKEE-EIGHT ® CAMSHAFTS FEULING ® REAPER ® SERIES

A workhorse, producing a wide powerband increasing torque and HP throughout the entire RPM range when compared to stock. Direct bolt in replacement for MILWAUKEE-EIGHT engines, can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or complete exhaust system and a high flow air cleaner. * Get that classic Harley ® “lope” sound from this camshaft. NOTE: FEULING recommends using mufflers with smaller cores for best lower RPM power and pull. 405 CAM

PART #1340 RSS #FE-1340

RPM range 1,700 - 5,700. Grind: 405, Chain Drive

CAM SPECS*

VALVE LIFT .395

OPEN 4 ATDC 36 BBDC

CLOSE 24 ABDC 11 BTDC

DURATION @ .050” 200 205

LIFT @ TDC .068 .049

LOBE CENTERLINE 103 108

INTAKE

.405 EXHAUST RPM RANGE: 1,700 - 5,700

GRIND: 405

OVERLAP: 7

*Cam specs measured on the lifter @ 0.050” lift with 1.61 rocker arm ratio

The 465 Reaper is an accelerator, producing solid bottom end performance with substantial gains above 2,800 RPM when compared to stock. This direct bolt in replacement for MILWAUKEE-EIGHT engines can be used with stock valve springs, pushrods, lifters and exhaust. Will respond well with slip-on mufflers and or performance exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valvetrain See FEULING #1107 or #1108 ( RSS #FE-1107 or #FE-1108 ) . This cam will also respond well with increased bore and or compression. * Get that classic Harley ® “lope” sound from this camshaft. 465 CAM

PART #1343 RSS #FE-1343

RPM range 1,850 - 5,950. Grind: 465, Chain Drive | RECOMMENDED PART: #1107 ( RSS # FE-1107 )

CAM SPECS*

VALVE LIFT .445

OPEN 4 BTDC 50 BBDC

CLOSE 23 ABDC 6 ATDC

DURATION @ .050” 207 236

LIFT @ TDC .100 .100

LOBE CENTERLINE 99.5 112

INTAKE

.465 EXHAUST RPM RANGE: 1,850 - 5,950

GRIND: 465

OVERLAP: 10

*Cam specs measured on the lifter @ 0.050” lift with 1.61 rocker arm ratio

(07) 3252 5381