Feuling Catalogue M8 Parts

FEULING ®

MILWAUKEE-EIGHT ® PARTS & KITS

HP + ® ONE PIECE PUSHRODS

Fixed Length 4130 Chrome Moly one piece pushrods with swedged formed ends. Heavy duty 7/16” diameter tube with 0.165” wall thickness, precision concentricity, heat treated with a black oxide finish. Intake and Exhaust length pushrods are stock replacement lengths and designed to work with the factory base circle camshaft dimensions. These pushrods work with all FEULING, stock and SE MILWAUKEE-EIGHT camshafts. WARNING: Due to the unstable nature of this 4 valve engine design with 1 rocker arm activating 2 valve springs FEULING highly recommends running one piece pushrods over quick install adjustable rods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.

PART #4087 RSS #FE-4087

HP+ 0.165” Wall. Includes 2 Intake and 2 Exhaust Pushrods. (Qty. 4)

1. Remove gas tank, spark plug wires from plugs, left side spark plugs, fuel injector plug ins, compression release plug ins etc. 2. Remove voltage regulator bracket bolts Qty. 2 3. Remove front top engine mount, from frame first then cylinder heads 4. Remove exhaust 5. Remove oil line ‘oil cooled models’ small catch tray on top of trans cover, wad of rags in the front to catch oil 6. Remove cam cover, rotate engine to timing marks 7. Remove top rocker covers, rocker arms, pushrods, pushrod tubes, lifter covers FEUL ING TECH T IP: INSTALLING 1 Piece Push Rods with cam install

• Optional FEULING camplate/oil pump fastener kit for Twin Cam ® engines • Quality 12-point heat treated 8740 chrome Moly steel bolts with black oxide finish • Feature precision rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading. • Wide underhead flange design provides even load distribution for optimum sealing of surfaces - preventing leaks • Quality engine builders demand quality fasteners! Secure your engine with complete confidence. • Tensile strength rated @ 170,000 psi – Superior & Stronger than OEM & stronger than grade 8 fasteners • Manufactured by ARP to FEULING’s exact specifications • Kits include Moly assembly lubricant for installation • Made in the U.S.A. CAMPLATE / OIL PUMP FASTENER KIT

PMS: Process Black RGB: R-0, G-0, B-0 CMYK: C-30 M-30, Y-30, K-100

26 00, K-0

um size is 1.75 in. wide. If a smaller logo is required see “Special Useage on second page of this doc.

INSTALLED

PART #8023 RSS # FE-8023 PART #8022 RSS # FE-8022

‘17-’18 MILWAUKEE-EIGHT Engines equipped with FEULING HP+/RACE SERIES Camplate & Oil Pumps

OE+ camplate/oil pump fastener kit

(07) 3252 5381