Echo Rentals

Tools & Equipment

Greenlee 441 Series Cable Feeding Sheaves Yoke frame slides into the end of conduit. 7 sizes available. 2" wide - # 441-2 3-1/2" wide - # 441-3-1/2

6" wide - # 441-6

2-1/2" wide - # 441-2-1/2

4" wide - # 441-4 5" wide - # 441-5

3" wide - # 441-3

Instruction Manual

HIS HB1A-6 Cable tray roller HB1A-6 is a 6" split-box type cable roller guide designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through. Aluminum base casting. Quick tee-handle clamp on. 3/8" locking pin for locking and unlocking unit.

HIS HB1A-9 Universal cable tray roller HB1A-9 is a hybrid roller guide between the split-box design of the HIS HB1A and the size of the HIS HB9A, and can also be used on horizontal elbows. Can be mounted on the cross-bar. Can be extended above or below cable tray with a cross-bar and extended tray clamps. Can be mounted on the side of the cable tray using the quick side tray clamp.

HIS HB1A-9-STC Used for clamping universal cable tray roller HB1A-9 to the sidewall of the cable tray.

HIS HB9A HB9A cross-tray roller is a low pro le cross-tray roller assembly designed for guiding cable into outside vertical risers and through straight sections of cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers, or several in-line on the straight section of cable tray. HIS model HB9A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.

HIS HB4A HB4A cross-tray roller is designed for guiding cable into inside vertical risers in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB4A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.

15