Echo Rentals

Tools & Equipment

HB5A cross-tray roller is designed for guiding cables around horizontal elbows in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB5A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall. Optional clamps are available for other sidewall heights. HIS HB5A

HIS HDR6-12x7A HIS duct rollers are designed to assist in guiding cables into ducts or conduit and help reduce "Cable Scuffing" on the edge of duct or conduit. The "Slotted-Duct-Adapter" assists in removing this tool from the cable, once the cable is pulled into place.

HIS HRR-D12-7A / HRR-D10-5A HIS rim rollers are lightweight, with two high-strength sheave-type cable guides. The units can be used for guiding cable into or out of vaults and hand-holes. The powder-coated frame protects cable scuffing and locks to the edge of the vault when pull force is applied.

Hook Type Sheaves - 8,000 lb. Capacity

HD hook sheaves. 4 sizes available:

18" diameter, 6"W, 46 lbs. - # 818 12" diameter, 5"W, 24 lbs. - # 812

36" diameter, 6-3/4"W, 101 lbs. - # 836 24" diameter, 6-1/2"W, 69 lbs. - # 824

3/4"-2" EMT, IMC and Rigid conduit bender. Programmable springback incorporated into digital display. Large analog protractor for accurate bends. 2 degree leveling adjustment. Bends in vertical and horizontal planes. Southwire PB2000 BENDmax Power Bender

Instruction Manual

Greenlee 555 Conduit Bender One bender to bend EMT, IMC and rigid conduit. Fast and easy setup on the jobsite. Steel reinforced follow bars for long life. Optional 1813 Bending Table and accessories for easier operation.

Instruction Manual

16