2018-Flex-Owner's-Manual

Maintenance

AUTOMATIC TRANSMISSION FLUID CHECK WARNING Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components. The transmission does not consume fluid. However, if the transmission slips or shifts slowly you should check the fluid level. If you notice a sign of leaking fluid, contact an authorized dealer. Checking the Transmission Fluid Level WARNING The dipstick and surrounding components are hot. Use gloves when moving components and checking the transmission fluid level. Failure to follow this warning could result in serious personal injury. Only check the transmission fluid level when the engine is at normal operating temperature 179°F (82°C)-199°F (93°C). Normal operating temperature is reached after driving approximately 20mi (30 km).

A B

E190273

A

Minimum. Maximum.

B Note: Check the fluid level with the engine running and the transmission in park (P). 1. Make sure that your vehicle is on level ground. 2. Rotate the automatic transmission fluid cap in a counterclockwise direction. See UnderHoodOverview (page 246). 3. Remove the cap and dipstick andwipe it with a clean, lint-free cloth. Replace the cap and dipstick and remove it again to check the fluid level. 4. Make sure that the fluid level is between the MIN and the MAX marks. If the fluid level is at the MINmark, add fluid immediately. See Adding Transmission Fluid . 5. Replace the automatic transmission fluid cap anddipstick. Turn it clockwise until you feel a strong resistance. Low Fluid Level If the fluid level is within the minimum range (below point A) add the correct specification fluid to be within the hash mark area. See Capacities and Specifications (page 305). Note: If the fluid level is below the minimum range do not drive your vehicle. A low fluid level can damage the transmission.

253

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting