2018-Flex-Owner's-Manual

Maintenance

Rear WindowWiper Blade

3. The wiper arm has a snap retention feature to receive a cross pin from the wiper blade structure. Grip tightly and press on the arm/blade joint from beneath and separate the blade from the arm. Avoid rotating thewiper blade structure and trapping your left hand between the arm and blade. 4. Attach the newwiper to the wiper arm and press it into place. Note: Make sure that the wiper blade locks into place. ADJUSTINGTHEHEADLAMPS Vertical Aim Headlamp AimTarget

E253247 1. Grab the wiper arm with one hand close to the arm/blade joint and pull it as far away from the glass as possible. Do not use excessive force because it can break the wiper arm at the heel. Hold it there until the next step. Note: Do not hold the wiper blade when lifting the wiper arm. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. 2. Grab the primary structure of the blade with the other hand close to the arm/blade joint.

E142592

A B C

8 ft (2.4 m).

Center height of lamp to ground.

25 ft (7.6 m).

D Vertical AimAdjustment

Horizontal reference line.

1. Park your vehicle on a level surface approximately 25 ft (7.6m) away from a vertical wall or screen. 2. Apply the parking brake.

E253248

258

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting