2018-F150-Owner's Manual

Load Carrying

Stowing the Step

Note: For loading and unloading equipment, your ramp should be set between 10degrees upward and 26 degrees downward to avoid damage to the ramp claw and tailgate plate. Note: When using your vehicle for off-road operation, remove the bed ramps from the vehicle and store them in a safe location away from your vehicle. Using the Bed Ramp 1. Remove the front and rear cables.

E167269 Push the step under your vehicle with your foot until it fully latches. Do not push on the button while stowing the step. BED RAMPS (If Equipped) WARNINGS When sliding the ramp up or down, take care not to get your fingers or hands caught in the mechanism. Failure to follow this instruction could result in personal injury. Make sure that you correctly install the ramp to the tailgate plate. Failure to follow this instruction could result Do not step or sit on the ramp when it is in the stowed position. Failure to follow this instruction could result in Only install the ramp within the prescribed ramp angles. Failure to follow this instruction could result in personal injury. Note: The ramp maximum capacity is 800 lb (363 kg). Note: Verify the ramp is on stable ground before usage. in personal injury. personal injury.

E194380 2. Open the cam lever arms and unscrew the cam bolts. 3. Remove the ramp from the ramp holder.

E211150 4. Rotate the stops at the underside of the ramp to the open position.

276

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting