Flyer Lange hakhamers EN

NOVELTY 2021 LONG CHOP AND NEEDLE SCALERS FEATURES AND BENEFITS

What are long chop and needle scalers? The long chop and needle scalers from RODAC are ergonomic tools that are supplied in different lengths for chopping, demolition and scraping or disposal operations.

599 €00 FROM

RODAC.COM RODAC.COM

SAM.EU SAM.EU

NL: INFO@SAM-RODAC.COM +31 (0)46 458 2299 BE/LUX: BELUX@SAM-RODAC.COM +32 (0)2 331 34 34 - D: + 49 (0) 3222 168131

LONG CHOP AND NEEDLE SCALERS FEATURES AND BENEFITS STEEL

ALUMINIUM (LITE)

RC241 740 mm

RC242 1100 mm

RC244 1400 mm

RC246 2200 mm

RC243 1100 mm

RC245 1400 mm

RC247 2200 mm

RA7051102 Chisel 203 mm long, 100 mm wide. Universal chisel for removing, for example, asphalt or paint layers. RA7052102 Curved chisel 203 mm long, 100 mm wide. Universal chisel for removing, for example, asphalt or paint layers. RA7051101 Chisel 229 mm long, 25 mm wide. Universal chisel for breaking and demolition work . RA4313508 Chisel 203 mm wide. Universal scraper blade with wide flat brim.

RA4153532 Needle scaler..

• VARIOUS LENGTHS • LOW AIR CONSUMPTION • (LITE) LIGHTWEIGHT ALUMINIUM • UNIQUE DESIGN AND CONSTRUCTION • 5 TOOLS IN 1 How do they work? They are pneumatic tools (powered by compressed air). The hammer function makes it possible to break, remove and scrape materials from a range of surfaces, including concrete, steel and wood. What are the main benefits? We offer various attachments, so that this tool can be used for many industrial purposes. The diffent lengths of chip- ping hammers can be equipped with different attachments. We have 5 different attachments in our range for different applications. We also have a range of steel tools and a range of (Lite) versions, which are extremely suitable for specific purposes, such as work above your head. Available in lengths from 740 mm to 2200 mm.

RA4313508SET 5x Loose knives. .

RA4313504 Chisel 102 mm wide. Universal scraper blade with wide flat brim.

RA4313504SET 5x Loose knives.

RODAC.COM

MAIN AREAS OF APPLICATION: Floors Renovation Tools Oil and gas Infrastructure contractors Shipyards Painters of major projects Asbestos removal Ship owners and marinas Shipbuilders Defence Petrochemical industry Road and bridge construction and maintenance Railway maintenance Concrete repair Demolition companies Food and beverage industry Tool rental companies

Energy companies Chemical industry Waste disposal Foundries Steel construction Prefabrication companies Natural stone factories Cement factories Railways Pulp and paper industry Manufacturers of concrete blocks Pharmaceutical industry Metal industry Water purification companies etc.

SAM.EU

Which model is best for floors, the steel model or "lite" model? For floors we recommend the heavier steel model. The "lite" model is best suited for work above hip height. What are the best fittings for removing linoleum, vinyl and glue? Scrapers are available in 2 different widths, for removing soft floor coverings, glue, rubber scraps and scraping material. What air pressure do the tools run at? All tools are designed to work on 6.3 Bar, this is very important because damage can be caused by both too low and too high a working pressure. Which compressor do I need? The compressor chosen must be able to provide sufficient pressure to operate the tool and all other equipment used. Air consumption is measured in CFM (cubic feet per minute),LPS (liters per second), LPM (liters per minute). You must ensure that the compressors output is classified as FAD (Free Air Delivery) and that it must provide enough air for the tool at 6.3 Bar. The air consumption of these tools is 126 liters per minute. Why are pneumatic tools better than an electric version? The different lengths available make this tool perfect for working without reaching or having to duck. Its extremely low air consumption means it can be used with a small, portable compressor. The unique design and pneumatic technique makes this tool much less fragile and therefore it will have a longer life than power tools.

RODAC International B.V. Nijverheidsstraat 1 • 6135 KJ Sittard P.O. Box 353 • 6130 AJ Sittard • The Netherlands NL: +31 (0)46 458 2299 BE/LUX: +32 (0)2 331 34 34 D: + 49 (0) 3222 1681310 E-MAIL NL: info@sam-rodac.com BE/LUX: belux@sam-rodac.com

SAM TOOLS BELGIUM Chaussee De Namur 60 1400 Nivel les TEL. +32 (0)2 331 34 34 FAX +32 (0)2 331 34 43 E-MAIL belux@sam-rodac.com

RODAC.COM

SAM.EU

NL: INFO@SAM-RODAC.COM +31 (0)46 458 2299 BE/LUX: BELUX@SAM-RODAC.COM +32 (0)2 331 34 34 - D: + 49 (0) 3222 168131