Flyer Lange hakhamers EN

Which model is best for floors, the steel model or "lite" model? For floors we recommend the heavier steel model. The "lite" model is best suited for work above hip height. What are the best fittings for removing linoleum, vinyl and glue? Scrapers are available in 2 different widths, for removing soft floor coverings, glue, rubber scraps and scraping material. What air pressure do the tools run at? All tools are designed to work on 6.3 Bar, this is very important because damage can be caused by both too low and too high a working pressure. Which compressor do I need? The compressor chosen must be able to provide sufficient pressure to operate the tool and all other equipment used. Air consumption is measured in CFM (cubic feet per minute),LPS (liters per second), LPM (liters per minute). You must ensure that the compressors output is classified as FAD (Free Air Delivery) and that it must provide enough air for the tool at 6.3 Bar. The air consumption of these tools is 126 liters per minute. Why are pneumatic tools better than an electric version? The different lengths available make this tool perfect for working without reaching or having to duck. Its extremely low air consumption means it can be used with a small, portable compressor. The unique design and pneumatic technique makes this tool much less fragile and therefore it will have a longer life than power tools.

RODAC International B.V. Nijverheidsstraat 1 • 6135 KJ Sittard P.O. Box 353 • 6130 AJ Sittard • The Netherlands NL: +31 (0)46 458 2299 BE/LUX: +32 (0)2 331 34 34 D: + 49 (0) 3222 1681310 E-MAIL NL: info@sam-rodac.com BE/LUX: belux@sam-rodac.com

SAM TOOLS BELGIUM Chaussee De Namur 60 1400 Nivel les TEL. +32 (0)2 331 34 34 FAX +32 (0)2 331 34 43 E-MAIL belux@sam-rodac.com

RODAC.COM

SAM.EU

NL: INFO@SAM-RODAC.COM +31 (0)46 458 2299 BE/LUX: BELUX@SAM-RODAC.COM +32 (0)2 331 34 34 - D: + 49 (0) 3222 168131