Digi catalog EN

20 21

CLICK ON " i " FOR A PRODUCT SHEET AND PARTS DRAWING!

CLICK ON " i " FOR A PRODUCT SHEET AND PARTS DRAWING!

RC224 This metal shear with softgrip has a cutting capacity of 1.8mm and is very lightweight. This pneumatic metal shear is ideally suited for everyday and heavy use! METAL SHEAR

RC236 This punch and flange tool has a 5mm diameter. This tool has an air consumption of only 113 liters per minute and is therefore very economical in use. PUNCH AND FLANGE TOOL

1.8

1

CUTTING CAPACITY MM

CUTTING CAPACITY MM

1/4'' 850 6.3 113

1/4''

BSP RPM

BSP RPM

70 258 45

80 250 54

MM MM MM

MM MM MM

6.3 113

L/M

L/M

8

8

1.2

1.2

M/S.2

M/S.2

CLICK ON " i " FOR A PRODUCT SHEET AND PARTS DRAWING!

CLICK ON " i " FOR A PRODUCT SHEET AND PARTS DRAWING!

RC4005 This nibbler quickly bites away small pieces of metal by means of a pin. The powerful nibbler can be steered in all directions so that it is possible to saw in steel plate with a thickness of up to 1.25 mm. NIBBLER

RC380BC2 This grinder in blowcase can be used for the removal of striping, lettering, rust, coatings and seals. This pneumatic multigrinder is suitable for grinding weld seams and making body parts blank. Contents case: 1 Pneumatic grinder; 1 Adapter system; 2 metal brushes (1 coarse, 1 fine); 1 Rubber pad for conventional GRINDER IN BLOWCASE WITH ACCESSORIES

lacquers; 1 Rubber pad for waterborne lacquers; 5 black grinding wheels and washers.

1/4''

1/4'' 3500 6.3 110

BSP

BSP RPM

115 455 40

118 180 41

MM MM MM

MM MM MM

6.3 220

L/M

L/M

8

8

0.9

4.2

M/S.2

M/S.2

RODAC.COM