Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Thread milling cutter 250
Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro
Solid carbide thread milling cutter TM SP for inner thread
Design: Ultra-finest grain-solid carbide, with internal supply of coolant and 27° right spiral slots to achieve optimum cutting conditions. The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Application: For regular metric threads (both right and left thread) according to ISO DIN 13 for through-holes and blind holes. Note: Solid carbide thread milling cutter for additional thread types (UNC, UNF, pipe thread etc.) on request. You will further information in the technical appendix.
Solid carbide
M
DIN 6535-HA
60°
2xd
27°
Cutting Tools 1
l
1
2
1
d
d
l
2
TiCN
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1881
80
70
50
60
50
90
80
80
200
1881
Thread
Order No.
Gradient
Cutting length
Total length I 1 mm
Shank ∅ d 2 mm
Number of slots
mm
mm
TiCN
0006 0008 0010 0012 0014 0016
M6 M8
187.00 207.50 229.00 281.00 318.50 358.50 (W175)
1.00 1.25 1.50 1.75 2.00 2.00
13.5 18.1 21.7 25.4 31.0 35.0
54 54 64 74 74 80
6 6 8
3 3 4 4 4 4
M10 M12 M14 M16
10 10 12
Design: Ultra-finest grain-solid carbide, with internal supply of coolant and 15° right spiral slots to achieve optimum cutting conditions. The milling principle results in an exact thread depth, a very high surface quality in the thread, process-reliable machining of difficult to cut materials and thread production very close down to the base. Larger ∅ ranges can also be processed under consideration of the thread gradient. Application: For regular metric threads (both right and left thread) according to ISO DIN 13 for through-holes and blind holes. Note: Solid carbide thread milling cutter for additional thread types (UNC, UNF, pipe thread etc.) on request. You will further information in the technical appendix. Solid carbide thread milling cutter GFM for inner thread M
Solid carbide
DIN 6535-HA
60°
2xd
15°
l 1
d 2
d 1
l 2
l 3
TiCN
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Copper, brass, bronze
Cast iron materials
Al, Al and Mg alloys
Order No. 1884
80
70
50
60
50
90
80
80
200
1884
∅ d 1
Order No.
Gradient
Cutting edge length l 2 mm
Effective length l 3 mm
d ≥ für Gew.-∅
Overall length l 1 mm
Shank ∅ d 2 mm
Number of slots
mm
mm
mm
TiCN
0010 0012 0013 0016 0017 0020 0021 0023
10 12 12 16 16 20 20 20
279.50 358.50 341.50 425.00 454.00 612.50 670.00 598.00 (W175)
1.00 1.00 1.50 1.50 2.00 1.50 2.00 3.00
16 20 20 25 25 33 33 33
14 18 18 24 24 30 30 30
25 31 31 40 40 50 50 50
70 80 80 90 90 105 105 105
10 12 12 16 16 20 20 20
4 4 4 5 5 5 5 5
1/232
Made with FlippingBook Online document