Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Coating thickness gauge/calibration service 846

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Layer thickness measuring instrument Leptoskop ®

Design: Versatile layer thickness measuring instrument with external probe, precise measuring technology and the possibility of fast on-site extension via enabling codes (software modules "Statistics" and "Data storage" ). Large, backlit graphics display (48 x 24 mm), large selection of probes. Measurement range 0–20000 µm (dependent on probes), 10 selectable languages, USB-/RS232 interface and rubber protective frame. Battery lifetime approx. 100 hours. Supplied with Fe probe to 5000 µm, control body, set of calibration foils, operating instructions, acceptance protocol/quality test certificate, measurement protocol, specialist literature and 2 Mignon batteries AA/LR06, 1.5 V, in plastic case. Measuring uncertainty (after calibration): Application: Determines the thickness of non-magnetic layers on magnetisable substrate (Fe, acc. to DIN EN ISO 2178) and the thickness of non-conductive layers on conductive base materials acc. to the eddy-current principle (NFe, acc. DIN EN ISO 2360). Note: Replacement battery: (Order No. 9041 0018, Ç 9/12). Further probes and comprehensive accessories, such as measurement value storage with easy data management such as under Windows, limit value input and monitoring, statistical evaluations with up to 999 measurement values, different PC assessment programs, many calibration options as well as software extension for data storage (e.g. PC software, data cable printer) are available on request. I formation 04_087_PRE_GB 24.04.2008 14:14 Uhr S ite 4/87 Layer thickness < 100 µm: 1 % of the measurement value ± 1 µm Layer thickness > 100 µm: 1–3 % of the measurement value ± 1 µm Layer thickness > 1000 µm: 3–5 % of the measurement value ± 10 µm Layer thickness > 10000 µm: 5 % of the measurement value ± 100 µm

RS232 USB

Calibration Service for Measuring Tools

4935

Order No. 0250

Calibration service? – Why?

Product quality is an increasingly decisive factor in safeguarding the future of a company. Strict customer requirements as well as the international legislation on product liability, extensive warranties and regulations require the consistent identification of measuring and control tools regarding product quality. Special attention is paid to the calibration of measuring tools and test equipment in the series of DIN EN ISO 9000 standards. Each certified company has to ensure that testing equipment is checked for usability and accuracy at regular intervals. The companies have to prove that the measuring tools used for quality-relevant measurements and controls are subjected to national measurement standards. The traceability is to be ensured and documented by checks for the compliance with national measurement standards at prescribed intervals. A large number of measuring and control tools offered in this catalogue are already delivered with a calibration certificate to national standards at no charge. Furthermore, we offer calibration of new measuring tools as well as recalibration. The calibration is not dependant on manufacturers. It goes without saying that we cooperate solely with calibration services affiliated to Deutscher Kalibrierdienst (DKD/German calibration service). The standards (DKD standard) of these calibration services are compared to the national standards of PTB (German federal physical-technical institute) at prescribed intervals. The calibration is effected in accordance with prescribed DIN standards, the directives VDI/VDE/DGQ 2618 ff. and/or company standards. Do not hesitate to contact our specialist in case of further questions. The employees of our partners are looking forward to supporting you, too.

1235.00 ◊ (W494)

Equipment

Measuring

4

Test equipment monitoring service/calibration

Calibration service? – Why? More and more, the quality of the products produced is the determining factor in securing a company's future. Stringent customer requirements and international law on the liability of producers, extensive warranties and regulations require the complete identification of measurement and test equipment that can affect product quality. The calibration of measuring tools and test equipment monitoring is of particular importance in DIN EN ISO 9000 standards. Each certified company shall ensure and demonstrate that test equipment is regularly reviewed for applicability and accuracy. The company must prove that the measuring instruments used for quality-related measurements and tests are linked to national standards. Traceability must be ensured and documented by means of examination in committed time intervals according to national standards. Much of the measuring and test equipment offered in this sales support is already delivered with a free and traceable national standards TEST CERTIFICATE . As an additional service, we offer the calibration of newly ordered measuring tools, as well as re-calibration. The calibration is performed independently of the manufacturer. Naturally, we work exclusively with recognised calibration laboratories associated with the German Calibration Service (DKD). The standards (DKD - standards) of this calibration office are compared in stipulated time intervals with the national PTB (Physikalisch-Technische Bundesanstalt) standards. The calibration is performed in accordance with predetermined DIN standards, of VDI/VDE/DGQ 2618 et seq. guidelines, or by company standards. For more information, please get in touch with our expert advisors. When required, the employees of our contractors are also available.

PTB national standard

T r a n s f e r s t a n d a r d

T r a n s f e r s t a n d a r d

DKD reference standard

Dimensions of finished products

Measuring tools in production

Calibration service Reference standard Transfer standard Working standard Company standard

4/8

4/126