Blue Viper Instruction Guide

DANGER This sprayer operates with liquid under pressure from the pump to the spray nozzle (The tank is not pressurized).  Failure to observe CAUTIONS and follow instructions for use and maintenance could result in INJURY or PROPERTY DAMAGE from discharge of spray material. DO NOT USE ANY FLAMMABLES IN THIS SPRAYER as it is not designed nor intended for such use. Some spray materials can ignite or explode. Do not spray in an enclosed space, near an open flame such as found in a BBQ grill or water heater, near an electric motor or open switch, or any source of heat. DO NOT SMOKE while spraying. Use of flammables could result in SERIOUS INJURY or PROPERTY DAMAGE from unintended ignition or explosion. DO NOT USE ANY CAUSTICS OR ACIDS IN THIS SPRAYER , since these can damage or weaken the sprayer and its parts, resulting in SERIOUS INJURY or PROPERTY DAMAGE from unintended discharge. • Follow chemical manufacturers instructions on disposal of all waste from the sprayer. • Weather conditions and terrain must be considered when using the Blue Viper. • Do not spray on windy days. DYE • Blue Viper disappearing dye is a patented, non-hazardous, non-staining colorant. • Keep Out Of The Reach Of Children . Avoid contact with eyes and skin. • May be harmful if swallowed. • Do not release concentrated color directly into the environment. • See MSDS for additional information. • Emergency Contact: ChemTrec (800) 424-9300. WARNING: Keep sprayer and all spray materials away from children and pets. CAUTION • Only use weed killers and insecticides approved for use in spraying systems. • Use Personal Protective Equipment as directed by the product. • Be sure to read and follow all chemical label directions. • BEFORE USING YOUR SPRAYER, thoroughly INSPECT the sprayer. Be sure there are no loose parts. • DO NOT USE if any parts appear to be damaged, discolored, brittle, loose. • Do not point sprayer toward your head or body. Never allow any of the spray to land on your skin. • Do not use hot or boiling liquids in sprayer since this may weaken or damage tank, pump or hose. • Do not leave residue or spray material in sprayer after use. It may harden and clog the sprayer or its parts. • Empty, clean and drain sprayer tank and pump at end of each season according to directions. • Do not smoke or eat while mixing spray materials or spraying, and wash up afterwards. • Do no attempt to replace any parts on your sprayer. Other parts may not fit properly or may be weakened by spray materials and fail, resulting in SERIOUS INJURY by unexpected discharge of spray material. • Do not submerse in water or allow staying wet. • Do not remove screws in handle control end or sprayer end. No user service parts. • Make sure you follow all instructions for mixing and safety precautions found on the weed killer/insecticide packaging or website. • Some chemicals might damage the pump valves if allowed to soak untreated for a long period of time. Always flush the pump with water after use.