68 / 108
66
N
ovember
2011
www.read-tpt.com›
T
echnology
U
pdate
Typical processes where the system
offers new solutions are peeling,
grinding, polishing, straightening as
well as in quality control lines (NDT).
The dimensional data for diameter,
ovality etc can be fed out directly to
the user’s network or also displayed
in real time for the operator by USYS
processors and also for feedback to
the machine.
Complete
accessories
like
secondary protection enclosures,
cooling devices, air purging, air
knives, etc are available for heavy-
duty environments.
Zumbach Electronic AG
–
Switzerland
Fax: +41 32 356 04 30
Email:
sales@zumbach.chWebsite:
www.zumbach.comZUMBACH Electronic, Switzerland
has extended its well-known range of
ODAC
®
laser scanners for non-contact
inline diameter measurement for large
size solutions.
With the ODAC 550 it is now
possible to measure also large steel
bars, tubes, rolls, etc up to 500mm
or more at accuracies of a few metric
microns and rates of up to 2,000
measurements/s. Any other material
like titanium, brass, alloys, plastic
works as well.
This was made possible by the
development of a revolutionary optical
scanning technique with a highly
parallel and seamless measuring field
(no dead zone!). This technology also
allows mounting emitter and receiver
far apart from each other, depending
on the available space conditions.
High-precision diameter
control in cold processes
for heavy environments
Automatic handling
LOECO produces equipment for the
automatic handling of tubes through
the pickling and galvanising process.
Serving customers for almost 40 years,
the company has installed new lines,
and modernised and upgraded existing
lines, while constantly improving the
technology.
The Loeco Advanced Automation
Pipe Pickling and Galvanizing Line
ensures a uniform even coating.
Single pipe pickling is more
effective than bundle pickling, and acid
consumption is only half that of bundle
pickling.
Other benefits of the system include
shorter pickling time; no black spots
or bending; fewer defaults due to
consistent pre-treatment; no human
faults through automation; total control
of first-in-first-out galvanising process
for equal products; fume-free housing
for workers’ safety and longer hall and
crane life; and immediate blowing after
extracting for better coating thickness
control.
Loeco helps customers optimise
efficiency. The products’ finish will be
uniform, to the standards required and
by using minimal resources.
Environmental
aspects
are
accommodated by complete fume
suction and cleaning as well as recycling
of the pickling media. Loeco’s latest 6"
pipe galvanising line is in production
in Brazil, and another in Guatemala,
where structural goods can also be
handled.
Loeco-Industrieanlagen GmbH & Co
KG
– Germany
Fax: +49 208 5898124
Email:
loeco@t-online.deWebsite:
www.loeco.deAluminium
extrusion
ZHEJIANG KimKing Aluminum Product
Co Ltd, China, is an aluminium extrusion
and finished aluminium product factory,
with an annual production of 12,000t.
The company has two 10t aluminium
melting furnaces, eight 500-2,000t
extrusion production lines, two anodising
production lines and one electrostatic
powder coating production line.
They can provide aluminium casting
rods, aluminium extrusion profiles and
aluminium products that are widely
used in fields such as rail transportation,
elevators, vehicles and radiators.
Zhejiang KimKing Aluminum
Product Co Ltd
– China
Email:
info@kkalu.comWebsite:
www.kkalu.com