Crest 2015 Catalog With Prices

244 / 276

| Smoke, Heat & CO Detectors Security &Maintenance
244
*Shipped direct from the factory to you.
phone: 1-800-328-8908 | fax: 1-800-369-9207 | online: | 2015 | F35
Combined Smoke/Heat Detector
This photoelectric smoke detector with heat
sensor is available in a 2-wire or 4-wire unit. Easy to
install, with a plug-in design, the large wire entry
port and in-line terminals provide ample room for
neatly routing wiring inside the base. Base
accommodates a variety of back box mounting
methods as well as direct mounting with drywall
anchors.
• Built-in remote maintenance signaling
• Drift compensation & smoothing
algorithms
• Simplified sensitivity measurement
• Wide-angle, dual-color LED indication
• Loop testing via EZWalk feature
Part No. Description Price
Kidde Economy Smoke Detector
Battery powered ionization unit offers the
maximum protection in a compact design.
Twist-off mounting bracket for quick installation
and battery replacement. Includes one 9 V
battery, mounting screws, test button, lowbattery
indicator chirp and flashing red light to indicate
power.
• Loud 85 dB horn for safety
• Ionization chamber responds fast to low-
smoke flaming fires
Part No. Description Price
First Alert® Carbon Monoxide Alarm
The CO Alarm features a digital display that lights
up for easy readings. Electrochemical CO
sensing allows greater temperature and humidity
variations for accurate detection. Peak Level
Memory stores and displays the highest CO level
detected. Detector will alarm at 70, 150 and
400 PPM, and can be tested using the front test
button or remotely using most standard IR remote
controls. The unit plugs directly into a standard
non-switched outlet, or use the 7 ft line cord for
multiple placement options. Two AA batteries
(included) provide battery backup and can be
changed without unplugging the monitor.
• Low battery warning
• Operates at 120VAC, 60 Hz
• Alarms at 85 dB from 10 ft
Part No. Description Price
Heat Detector
Heat Detector connects easily to most commercial
fire alarm systems. For use in areas where property
protectionisrequired such as boiler rooms, kitchens,
medicine or linen storage areas. Rate-of-risemodels
respond to a temperature increase of 15° F/minute,
sensing flash fires evenbefore the 135° or 194° fixed
temperature is reached.
• Rate-of-rise feature is automatically
self-restoring
• Not for use where life safety is a factor
Part No. Description Price
710CS Smoke Detector for the
Hearing-Impaired
710CS is a smoke detector for the hearing-
impaired. The Gentex 710CS is a 120 VAC
photoelectric single station smoke detector
designed to provide reliable early warning of
smoke where both audible and visual alarms
are required. Operates on the “light scatter”
principle, utilizing a pulsing LED light source and
a photodiode sensor in a fully screened sensing
chamber. Smoke entering the chamber deflects
the infrared beam and triggers the alarm.
During the alarm period, the strobe will flash at a
brightness of 120 candela, 60 times per minute.
Complies with Title 19 of the California
Administrative Code.
• 90 dB piezo signal
• 5 to 1 signal-to-noise ratio
• Nominal 21⁄2% sensitivity
• Convenient test switch
• High-intensity strobe light with red
“FIRE”lettering
Part No. Description Price
YEAR
WARRANTY
7
YEAR
WARRANTY
Self-Diagnostic Photoelectric
Smoke Detector
This unit features a replaceable optical chamber,
diagnostic LED, sounder, heat detector, built-in
power supervision relay and a design to reduce
nuisance alarms caused by dust, RF interference
and ambient light. Mounts on single-gang box, 3"
round or 4" octagonal boxes. 4-wire, 12 or 24 V.
Part No. Description Price