7-11 April 2014
any gas, and so reduces the risk of fire,
protecting the site from fire hazards.
Using a CTO machine makes it easy
to keep the site clean using a waste tank
set under the machine, and leaves no
waste on-site after the job is completed.
It is possible to cut dry or, if cooling is
necessary, water can be used to spray
the cutting tools – no chemical solutions
are needed. The COFIM CTO machine
is ATEX-certified and can be used to
maintain any pipeline. There is no risk of
explosion due to sparks or fire caused
by a hot cutting process.
The machine is equipped with a start
safety handle with a minimum of 1.5m
distance for the safety of the operator.
Once the machine is set on the pipe to
be cut or cut and bevelled, the operator
can manage the whole process while
keeping a safe distance from the rotating
cutting tool.
A clamshell design allows the CTO
machine to be used on closed lines.
Various options can be used on the CTO
machine, such as out of round tracking
devices, single point machining devices
for heavy wall pipes, and counter boring
devices.
Fax: +33 476 659 472
Email:
Website:
Cojafex BV
TBC
The Netherlands
COJAFEX recently supplied and
installed an auxiliary bending arm for
the PB 1400 bending machine at Larsen
and Toubro in India. This arm enhances
the capabilities of the 56" pipe bending
machine. It can now also process pipes
with diameters ranging from 4" to 16" at
radii 1.5D and up.
Induction bent spools save on
welding. Cojafex bending machines can
bend complex shapes.
The company’s proprietary collision
detection software enables customers
to determine the feasibility of a proposed
spool piece in the estimation/quotation
phase.
Fax: +31 10 412 24 94
Email:
Website:
Compri Tube Clean GmbH
5J20
Switzerland
TUBE Clean GmbH cleaning equipment
is used to clean the internal wall of
hoses, tubes and pipes (HTP) for use in
a variety of industries including chemical,
petrochemical, construction, agriculture,
transportation, aviation, food and
beverage. The reliable technology offers
a system of hand-tools, semi-automatic
or automatic plants and equipment.
Bison 4000 technology is for internal
cleaning of hose and tube. The modular
tube cleaning system is used for the
automated cleaning of pipes and tubes
with inner diameters of 1.8-34mm. The
cleaning capacity is up to 2,500 pipes
or hoses per hour with up to 15m/s
cleaning speed. The system can be
expanded to individual requirements
with components, and customised
solutions are available, developed and
manufactured in Switzerland.
Tube Clean GmbH will present the
Bison 4000 technology at the Tube
2014 show in Düsseldorf showing all its
possible areas of application.
www.LAP- LASER.com
BOOTH B13/7A
LASER
MEASUREMENT
SYSTEMS
■
Profile
■
Straightness
■
Diameter
■
Ovality
■
Tube End Inspection
Visit us at Tube in Duesseldorf,
Hall 7A Booth B13
