Background Image
Table of Contents Table of Contents
Previous Page  51 / 96 Next Page
Information
Show Menu
Previous Page 51 / 96 Next Page
Page Background www.read-tpt.com

T E CHNOLOG Y

MARCH 2017

49

C

M

Y

CM

MY

CY

CMY

K

Amsaw-Wagner - half page 180 x 125 1116.pdf 1 2016-11-22 4:06 PM

Weld purge monitor suitable

for aerospace tube welding

WHEN welding metals such as titanium,

it is essential tomeasure the oxygen level

before, during and after welding using a

weld purge monitor (oxygen analyser).

Weld purging expert Huntingdon Fusion

Techniques (HFT) has launched an

updated handheld PurgEye

®

200 weld

purge monitor, now with PurgeNet™.

Georgia Gascoyne, CEO for HFT,

said, “PurgeNet allows networking to

standard accessories. Typically, one

accessory allows direct interface to an

orbital welder or any other automatic

welding machine, so that the oxygen

level in the vicinity of the weld can be

monitored and the welding machine can

be switched on or off according to pre-

set oxygen levels. A second accessory

is a warning lamp that can signal

when oxygen levels are low and high

according to pre-set levels.”

The portable PurgEye 200 is now

manufactured with a new OLED

(organic light emitting diode) display,

which will give brighter, clearer and

sharper readings for viewing at greater

distances than before and at wider

angles. These OLED displays are

mainly symbol based, not text based,

so menus are easily understandable, no

matter what language the user speaks.

This latest PurgEye 200 will operate

either on batteries or mains power.

Charging can also be carried out from

an optional dock, and battery life will

be longer than its predecessor. Along

with louder, pre-settable audio alarms

for rising or falling oxygen levels, the

PurgEye 200 features a faster response

long-life sensor and language options.

The updated model has an integral

electro mechanical pump so that it can

be used to extract samples from a weld

purge zone, where there is insufficient

flow rate or positive pressure to activate

the sensor correctly.

The PurgEye 200 weld purge monitor

reads down to 1 ppm (very accurate

to 10 ppm). The monitor is IP65

rated, which means it can be used in

demanding areas where instruments

are used on site, such as in desert or

tropical conditions.

PurgeLog™ software gives weld

purging results to give quality control

documents for each weld. The monitor

also has the capability to switch between

percentage oxygen and parts per million

shown on the display.

Huntingdon Fusion Techniques

– UK

Fax: +44 1 554 836 837

Email:

hft@huntingdonfusion.com

Website:

www.huntingdonfusion.com

PurgEye 200