TPi January 2010

53 / 68

January 2010 Tube Products International 51
12-16 April 2010
high speed automatic forming machines,
in steel grades AISI 316l and 321, to ISO
EN 10380, with close, standard and
wide pitch annular corrugation form.
The hoses have good flexibility and high
strength, and are heat resistant and
pressure tight. The hoses can be used
to convey most kinds of fluids, gases
and chemicals, and can absorb thermal
expansion and vibration.
Handle SA
France Hall 3 Stand C55
Handle SA manufactures stainless steel
tubes and cannulas. The company’s
capillary tubes are used in several
industrial fields, and are also used for
temperature control and regulation and
in micromechanic industries.
With dimensions ranging from 0.25 to
10mm OD, and 0.06 to 60mm ID, the
company produces a complete range of
stainless steel hypodermic cannulas, to
manufacture various types of single-use
needles and catheters, in OD dimensions
0.25mm (31G) to 2.12mm (14G).
ISEND SA
Spain Hall 4 Stand C14
ISEND SA provides eddy current and
flux leakage test systems customised
to users’ needs and standards. The
technology is used for inspection,
measurement and industrial quality
control in the iron and steel industry,
automotive, energy, petrochemical and
other industrial sectors.
The company has launched two new
ranges of eddy current equipment:
FOCAnalyzer PRO® andROTOdiscover®,
targeting the inspection needs of
the pipe/tube and wire industry. The
new products incorporate state-of-art
technologies and new intensive data
processing algorithms.
The range starts with a single-channel
model, through the FOCAnalyzer family,
including the PRO® Series, which can
control up to 256 channels, and is
designed for simultaneous inspection
of several production lines. It has a
wide frequency range, including very
low frequencies, and is used in facilities
requiring a large number of probes for
production control at different process
steps, and also for complex inspection
systems at high speeds.
The ROTOdiscover range for rotating
industrial systems features up to 8
channels, with controlled lift-off on each
channel. It allows rotating inspection
with 2, 4, 6 or 8 probes at high rotary
speeds, which means there is no need
to slow down the production line speed.
This unit with rotating industrial system
is used for longitudinal defect detection,
for precision-calibrated products
requiring a high degree of accuracy.
All ranges have integrated input/output
control, which simplifies installations
and integration in the field, and avoids
the use of specific programmable logic
controllers. Connectivity is assured by a
wide range of industrial communication
interfaces, including CANOpen,
DeviceNet and ProfiNet.
Kallas Edelstahl GmbH
Germany Hall 3 Stand C33
Kallas Edelstahl GmbH was founded
in 2001, and with the support of the
Italian tube mills Satinox Tubi Inox SpA,
Vigano di Gaggiano (Mi) and Tubinox
Srl, Eupilio (Co), was able to establish

Small diameter tubes from Handle SA
s ISEND’s FOCAnalyzer
