127 / 260
PUMPS
127
BELT DRIVEN FRAME MOUNTED PUMPS
Description
EDP
No
Est. Ship
Weight
Part No.
Price
1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI
46800 18 lb
FMC
619.77
1-½” x 1-¼” NPT, Max. 80 GPM, Max.100 PSI
47200 11 lb
FMC-CW-150
628.36
2” x 1-½” NPT, Max. 200 GPM, Max. 120 PSI
47400 24 lb
FMC-CW-200
822.27
2” x 1-½” NPT, Max. 180 GPM Max. 170 PSI
47550 42 lb FMC-CW-800-DRB 1761.41
KEY SHAFT DRIVEN
Description
EDP
No
Est. Ship
Weight
Part No.
Price
1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI
47040 23 lb
FMC-MAG-D 1178.18
1-¼” x 1” NPT, Max. 70 GPM, Max. 130 PSI
47195 23 lb
FMC-CW-MAG-D 1178.18
1-½” x 1-¼” NPT, Max. 130 GPM, Max.120 PSI
47030 25 lb
FMC-150-MAG-D 1196.59
1-½” x 1-¼” NPT, Max. 80 GPM, Max.100 PSI
47237 25 lb FMC-CW-150-MAG-D 1200.27
220 x 200 flange, Max. 140 GPM, Max. 160 PSI
47055 35 lb
FMC-650-MAG-D 2055.68
2” x 1-½” NPT, Max. 180 GPM, Max. 170 PSI
47570 45 lb FMC-CW-800-MAG-D 3000.68
MAGNETIC CLUTCH BELT DRIVEN
Description
EDP
No
Est. Ship
Weight
Part No.
Price
220 X 200 flange and 1-½” X 1-¼” NPT,
Max. flow: 170 GPM Max. pressure: 160 PSI,
E-coated cast iron centrifugal driven by a ⅞” keyed
CCW rotating shaft.
47057 40 lb
FMCWS-650F 2190.68
1-½” NPT suction X 1-¼” NPT discharge,
Max. flow: 170 GPM Max. pressure: 160 PSI,
E-coated cast iron centrifugal driven by a ⅞” keyed
CW rotating shaft.
47058 40 lb FMCWS-CW-650 2098.64
300 flange suction X 220 flange discharge,
Max. flow: 290 GPM Max. pressure: 150 PSI,
E-coated cast iron centrifugal driven by a ⅞” keyed
CCW rotating shaft.
47070 48 lb
FMC-750F
2432.45
BELT DRIVEN
FMC-CW-150
FMC-200
FMC-CW-200
FMC-650-MAG-D
FMC-750F
MAGNETIC CLUTCH DRIVEN ADVANTAGES
The integral magnetic clutch driven centrifugal pump design was first offered by Ace in 1982. These mod-
els enabled the operator to free the PTO shaft and hydraulic system for other uses. The 12 volt DC mag-
netic clutch is driven by a v-belt from the engine drive shaft. The clutch is idle until engaged by an on-off
toggle switch located at the driver’s seat.
FRAME MOUNT ADVANTAGES
Ace belt driven pumps are available in a variety of models which can be belt driven or direct coupled to a power source. The pumps are
available in either clockwise or counterclockwise rotation. The standard bare shaft pumps are designed with a keyway for mounting a drive
pulley or coupling.