Independent Ag Equipment

130 / 260

PUMPS
130 | INDEPENDENT AG EQUIPMENT PRODUCT CATALOG | PA: 800-345-3546 | OH: 800-848-8460 | IN: 888-563-1988 |
Description
Size Inlet
& Outlet HP Part No. Price
Complete pump with
Honda engine
2" x 2" 5 200PH5-SSW 4652.08
Stainless steel pump 3" x 3" 13 301PH13SSW 12,774.73
Description
Size Inlet
& Outlet Part No. Price
2" pump/bearing
pedestal ¾" shaft
2" x 2" 201PBSSW 3870.23
Description
Size Inlet
& Outlet Part No. Price
Pump only 2" x 2" 201POSSW 2965.25
Description
Size Inlet
& Outlet Part No. Price
1-½" pump/bearing pedestal
¾" shaft
1-½" x 1-½" 151PBIW 1400.55
Pump/bearing pedestal ¾" shaft 2" x 2" 201PBI-W 1281.82
Pump/bearing pedestal 1" shaft 3" x 3" 301PBI-W 2363.64
Description
Size Inlet
& Outlet Part No. Price
2" pump only 2" x 2" 201POI-W 1213.99
3" pump only 3" x 3" 301POI-W 2012.12
Description
Size Inlet
& Outlet HP Part No. Price
Complete pump with
Briggs engine
2" x 2" 5 201PI6PROW 2185.79
Complete pump with
Honda engine
2" x 2" 5 200PIH5W 2710.28
Cast Iron pump (wet seal) 3" x 3" 11 301PIH-13W 4166.67
The Banjo Wet Seal Pump is equipped with a double seal arrange-
ment where the seal is contained in an ethylene glycol (antifreeze)
reservoir. This enables the pump to run dry for short periods of time
without damaging the seal.
Extended service of the seal substantially adds life to the
pump and engine.
• Viton double seal contained in ethylene glycol reservoir
• Sight tube indicator
• Dynamic balanced impeller
• All stainless steel hardware
• Available in cast iron or 316 stainless steel, with bearing pedestal,
gas engine or pump only
316 STAINLESS STEEL WET SEAL PUMPS GAS DRIVEN CAST IRON WET SEAL PUMPS GAS DRIVEN
BEARING PEDESTAL
BEARING PEDESTAL PUMPS FOR ELECTRICAL ENGINES
PUMP ONLY
PUMP ONLY FOR GAS ENGINES
NOTE: Engine warranty service available at authorized Briggs & Stratton and Honda dealers.
200P6PRO
Briggs & Stratton
200PIH5W
with Honda
Engine
CENTRIFUGAL PUMPS
POLYPROPYLENE
SELF-PRIMING
CENTRIFUGAL PUMP
The pump is molded from a special high
strength polypropylene which is glass
reinforced for strength and toughness. The
rubber parts are made of EDPM compound. Also
available in Buna “N” and Viton rubber parts. Consult
factory for specific chemical resistance.
• Precision molded construction
• Corrosion resistant
• Low maintenance
• Lightweight
• Innovative design
Warning: Please do not run pump dry, restrict or
reduce port sizes or dead head pump. This could cause
compound failure to pump.
®
WET SEAL SELF-PRIMING CENTRIFUGAL PUMP
Description
Size Inlet
& Outlet HP
Est. Ship
Weight
Part No.
Price
Complete pump and
gas engine
1-½" x 1-½" 3 40 150P-3 918.19
Complete pump and
gas engine
2" x 2" 3 40 200P-3 918.19
Complete pump and
gas engine
2" x 2" 5 45 200P6PRO 1008.87
Complete pump and
Honda gas engine
2" x 2" 5 48 200PH-5 1862.40
CAST IRON WET SEAL PUMPS GAS DRIVEN
200PH-5
Honda