304 / 384
304
6-1-14
CHANNEL DRAINS
1. Determine location for channel drain
2. Install subfloor andbacker board adhering to local codes
3. Cut hole in floor allowing additional ¼". Allow access to fit and clampno hub coupling. See Fig1
4. Install no hub couplingonto channel drain
5. Apply abeadof silicone caulking to the undersideof tile flange
6. Install channel drain, by attaching no hub coupling to existingpiping
7. Cut your pattern intomembrane
8. Install waterproofmembrane as permanufacturer’s instructions. Adheremembrane to tile flange
on channel drain usingmembranemanufacturers recommended adhesive
9. Apply thin setmortar and install tile
10.Once above is completed anddry, install channel draingrate
11.Install grate in channel drainbase. If required, adjust legs ongrate level with tileprofile. Legs
extend clockwise rotationor retract counter clockwise rotation. Adjust all legs tobase todistribute
grate level evenly onbase. (N/A for JACLO SLIM)
INSTALLATION INSTRUCTIONS
zeroEDGE/SLIM -
No subdrain required
Figure 1
listed no hub
couplingby others
Retract
Extend
Grate legs
tile
flange
adhesive
grate
finished
tile edge
channel drain
subfloor
tilebase
tile
thinset/mortar
waterproofmembrane