![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0069.jpg)
67
CONSTRUCTION WORLD
AUGUST
2015
>
PRODUCTS AND SERVICES
“The new products have been developed using ‘Innovative Water-
based Technology’ – with excellent durability, fast drying times and
low odour. Backed by the company’s technical expertise, customers
are assured of using the highest quality products which is environmentally
aware,” she explains.
AQUANOVA Coatings System
Together, the AQUANOVA Primer and AQUANOVA Topcoat form the ideal
system for use in extreme industrial environments up to C3, and offers a
lifetime expectancy of up to 12 years.
The AQUANOVA Primer is a single pack water-based epoxy primer
and the ideal solution for corrosion protection, with excellent corrosion
resistance and resistance to under-film corrosion creep. The advanced
anti-corrosion technology allows for salt spray resistance up to an incred-
ible 1 000 hours.
“AQUANOVA Primer can be used with both water and solvent-based high
performance topcoats. Being water-based, this single pack primer coating
allows for ease of application to mild and hot rolled steel, aluminium and
polished aluminium. Its quick-drying properties mean less downtime in the
workplace,” Le Roux says.
AQUADUO Direct-To-Metal
This is an innovative primer and topcoat in one that can be applied directly
to prepared mild and galvanised steel. This saves both time and effort, and
produces a finish that withstands exposure from harsh environmental
conditions, while maintaining a protective sheen finish. Rust inhibitors are
built into the coating, thereby negating the need for primer.
PLASCOSAFE
Exceptional wood protection has always presented difficulties, with some
products leaving the wood looking lacklustre, le Roux admits.“PLASCOSAFE
Floor Coating was developed with exceptional abrasion resistance whilst
also enhancing the beauty of wood. This is an environmentally-aware
coating that is available in two different gloss levels, is fast drying and has
good stain and chemical resistance,” says Le Roux. It is a formaldehyde-free,
premiumwater-based product that has been specifically formulated for use
on interior wooden floors.
The PLASCOSAFE range also includes PLASCOSAFE Furniture Coating,
a range of single pack water-based coatings that is formaldehyde
free, has good mar resistance, and offers better UV stability than acid
catalysed lacquers.
Although the range was developed for the industrial coatings market,
it has a strong place in the DIY market as well. It is easy to brush apply and
the non-yellowing properties make lime washing and other effects easy to
achieve with sustainable results.
As the market moves rapidly towards sustainable products and services,
Le Roux indicates that Kansai Plascon will continue to innovate and provide
solutions that are not only kinder to the environment, but also reduce the
costs of protecting both wood andmetals fromearly deterioration.“Our pride
in our new water-based range is enhanced by knowing that our customers
will form part of a chain of environmentally aware decisions.”
The DHR263ZK’s three-mode operation utilising a SDS
plus one touch slide chuck – rotation only, rotation plus
hammering and hammering only – ensures easy operation
and handling. The built-in LED light with pre-glow and afterglow
functions illuminates the workspace for greater accuracy in poor
light conditions.
Operator comfort and more control during operation have not
been overlooked. An ergonomically designed vibration-absorbing
handle with sure grip reduces the magnitude of vibration and
hand fatigue.
Measuring 350 mm in length, the new DHR263ZK has a 26
mm capacity in concrete, 13 mm in steel and 32 mm in wood. It
features a no load speed of 0 – 1 200 r/min and delivers 0 – 4 800
blows per minute. The rotary hammer is supplied in a carry case
but all tool bits are sold separately.
For use in outdoor applications or harsh environments the
DHP263ZK has extreme protection technology, which provides
enhanced protection from dust and dripping water.
When the remaining battery capacity decreases below a certain
limit, the motor automatically stops and a solid red light reminds
you to replace the battery. There is one warning lamp for each
individual battery.
This model is compatible with the Makita 5 Ah (45 minutes
charge time), 4 Ah (36 minutes charge time) and 3 Ah (22 minutes
charge time) batteries.
The batteries and the charger are sold separately. The 3.0Ah
batteries are interchangeable with other 18 V Makita Lithium Ion
cordless tools in the range, while the 4 Ah and 5 Ah batteries are
compatible with all models that start with a D in the model name
and have a star on the battery terminal. The rechargeable and
eco-friendly Makita 18V 3 Ah Li-Ion batteries provide longer run
time. The LXT Li-Ion battery generates an impressive 430% more
lifetime work with two-and-a-half times more cycles.
Using cordless technology is a simple and effective way to
ensure productivity when a power source isn’t available but without
compromising on performance.
NEW ROTARY HAMMER
Makita is adding another twin 18V Lithium-
Ion Cordless tool to its comprehensive
range. The DHR263ZK Rotary Hammer is
powered by two 18V batteries, installed in
series to supply energy to the powerful 36V
DC motor drive system. This offers great
versatility as it utilises your existing 18V
battery and charger system, as well as being
a significantly more affordable option than
having to purchase a 36V tool and batteries.
>
A WATER-BASED
COMMITMENT
Kansai Plascon brand manager for industrial
coatings, Mareta le Roux reveals that the company
is proud to introduce a range of water-based
coatings that are lowinvolatileorganiccompounds
(VOCs), but durable enough to stand up to the
challenge of effectively coating metal and wood.
>