WCA September 2011

92 / 120

wire Southeast Asia – BITEC, Bangkok 13th-15th September 2011 90
wire Southeast Asia 2011
➣➢➣
diameter range of 6mm-225mm (over
lead), and a range of melting pots
are available for 10, 18 and 35 tonne
capacities.
Additional equipment includes the
cable repair and recovery system
CRRS, which has the possibility of
removing individual layers, such as
the outer jacket, lead sheath or triple
layer XLPE insulation, without causing
any damage to the subsequent layer
below. This enables the outer jacket,
lead sheath or triple layer XLPE to be
reapplied and the cable repaired.
Even if the cable is just going to be
scrapped, the metal price differences
for insulated or un-insulated cables are
very large and the equipment would
have a very short pay-back period,
if the metals are scrapped in their
‘bright’ form.
❍ Lead extruder from HFSAB
H Folke Sandelin AB (HFSAB) is also
able to supply second hand fully
refurbished lead extruders to very high
standards.
H Folke Sandelin AB – Sweden
Fax: +46 141 203 639
Email :
Website:
Two experienced international com-
panies supplying welding machines to
service the wire industry will be jointly
exhibiting at wire Southeast Asia.
Ideal-Werk of Germany and Clifford
Welding Systems of South Africa will
have a combined stand in the German
pavilion.
Ideal develops and manufactures
wire mesh welding machines and jig
welders for various wire articles. The
machines are designed to assure high
flexibility and short change-over times.
Clifford will demonstrate its capability
in the reinforcement and off coil line
wire and crosswire mesh production
line areas.
❍ Ideal butt welder type DSH 130 with
accessories
The company manufactures a com-
prehensive range of mesh production
machines covering high production
reinforcing lines, heavy quick-change
engineering mesh lines, precision
off coil light mesh lines and grating
welders.
Ideal also offers a wide range of butt
welding machines for all branches of
the wire industry.
The welders are used by wire drawing,
cable manufacturing and wire fabri-
cating companies, for butt welding of
steel and non-ferrous wire from 0.15 to
18mm diameter.
A wide range of accessories is available
for ease of the coil joining operation.
Annealing devices are also available
for annealing of the weld joints in
carbon steel wire.
Ideal-Werk – Germany
Fax: +49 2941 206 169
Email:
Website:
Clifford Welding Systems (Pty) Ltd –
South Africa
Fax: +27 33 355 34 34
Email:
Website:
ITEC Co Ltd is a manufacturer of
insulating machines. The company’s
machines are used by customers who
supply international manufacturers of
transformers, wind mills, high velocity
trains and motors.
ITEC’s main products are paper
taping machines, fibreglass covering
machines, and thermal Kapton
machines. The company is able
to design and construct machines
according to customer requirements.
ITEC Co Ltd – China
Fax: +86 21 33518029
Email:
Website:
As a manufacturer of modern wire
drawing and draw-peeling plants
Kieselstein offers wire manufacturers
individual machine solutions that are
tailored to the customer’s requirements
and optimised for the requested
purpose.
❍ Draw-peeling unit
The company will present a draw-
peeling unit for producing superior
quality wire. Draw-peeling units can be
delivered as a part of a draw-peeling
plant, but can also be integrated into
existing plant systems. It gives wire
producers the opportunity to increase
the wire quality considerably with low
effort and using existing wire drawing
plants.
Kieselstein GmbH – Germany
Fax: +49 371 910 4105
Email:
Website:
Ideal-Werk
German pavilion
ITEC Co Ltd
Stand F09
Kieselstein GmbH
Stand K18
❍ ITEC manufactures insulating machines