60 / 124
58
410-WA-108....... 8 oz. bottle...............11 oz.......................3.25
410-WA-116....... 16 oz. bottle........... 1
1
⁄
2
lbs.......................5.25
410-WA-110....... 1 gal.......................... 9 lbs.....................27.75
WATER AID
✱✱
IT'S NON TOXIC: Roc-Oil is rated as a food grade
mineral oil so you know it's safe to handle. It doesn't burn your
skin, unless you are very sensitive, and has no disagreeable odor.
✱✱
IT' HAS A HIGH FLASH POINT: Roc-Oil is non-
flammable under normal conditions. Its flash point is 309° which
is above normal temperatures. It's also above the flash point of
similar, lower grade mineral coolants.
Dispose of Roc-Oil following your local requirements for
mineral oils.
412-RO-1...................1 gal...... Shp. Wt. 10 lbs................... 30.00
412-RO-4............4 gal case..... Shp. Wt. 40 lbs................. 115.00
BLADE COOLANTS
RO C - O I L—T H E
ORIGINAL USER-
FRIENDLY, HIGH
PERFORMANCE
MINERAL OIL SAW
COOLANT
Before buying any saw blade, make certain you know
which type of coolant your rock saw requires. All
diamond saw blades cut faster in an oil lubricant, but
the old standard cutting oils have many undesirable
features. Some saw blades and rock saws still must be
used with oil, especially the larger blades and saws.
Water is now often used as a coolant, but it can rust
some blades and rock saws. Using the correct coolant
will directly affect blade performance. The following
is a general guideline:
SOFT ROCK: Use water, water soluble oil, or oil.
MEDIUM HARD ROCK: Use a water soluble oil
or oil.
HARD, DENSEROCKSUCHASAGATE: Use an oil
coolant only.
SAWACCESSORIES AND COOLANT
These handy clamps fit easily into most saw vises, making it
possible to cut a stone to the last thin slab section. Made of
durable cast aluminum. Comes in two sizes: 3" and 5".
601-70-1003............3"...............1 lb............................22.00
601-70-1015............5"...............1 lb............................23.75
ROCK GRABBER CLAMPS
These dressing sticks make it easy to sharpen saw blades to
keep them cutting properly. Made of special aluminum oxide
and designed for dressing diamond blades. Shp. Wt. : 8 oz.
For Blades:
Stick Size
Order #
Price
BLADE DRESSING STICKS
4" – 8"
1
⁄
2
" x
1
⁄
2
" x 6"
109-SS-05
4.60
10" – 14"
1" x 1" x 6"
109-SS-10
10.50
16" +
2" x 2" x 6"
109-SS-20
23.90
Use "Roc-Cut" in your trim saws, cabbers, faceting units, and
sanders—whatever uses a splash or recirculating system. It's
inexpensive (mix 1 part with 20 parts water for sawing and 1 part
with 30 parts water for grinding) and it will prevent rusting as well
as give you a great cutting lubricant. Nontoxic, non-allergenic,
has no vapors, odor or greasy film. Can be filtered and re-used
indefinitely. NOT for slab saws when cutting quartz materials,
nor for leaving in tank.
711-70-1116. ...........16 oz.........Shp wt 2 lbs...................... 8.95
711-70-1117. ...........1 gal..........Shp wt 10 lbs.................. 50.15
“ROC-CUT” WATER SOLUBLE LUBRICANT
WaterAid is a concentratedwetting
agent. It increases cutting action
of sawing, grinding, and sanding/
polishing operations using water
by eliminating surface tension and
preventinghydroplaning. It'sbiode-
gradeable andnormallyharmless to
skin. Approx. 6 drops per pint is all
that's needed.
Our Roc-Oil is a high quality, food grade
mineral oil that out performs other cutting
oils and without any of their usual disad-
vantages. Use it to cut any rock, from soft
to hard, and in any saw, large or small. You
get top quality performance along with
user friendly advantages.