89 / 124
87
SWIVEL HEAD PIN VISE
SINGLE END PIN VISE
DOUBLE END PIN VISE
SINGLE-END SLIDE PIN VISE
Pin vise has knurled slide
for easy one-hand operation. Capacity of 0 to 0.8mm. Length
is 4
1
⁄
2
".
150-PIN-221................................... 6 oz..................................4.80
DOUBLE END PIN VISE
A different size steel collet mounted
at each end of hollow handle makes this a highly versatile tool.
Use to hold drills, taps, reamers, wire, rods, or precision knife
blades. Collet capacity: 0 to .10" (0 to 2.5mm). Nickel-plated.
Length approx. 4
1
/
2
". May vary slightly from photo.
160-PV-657..................................... 6 oz..................................4.15
SWIVEL HEAD PIN VISE
All metal, hexagonal swivel head
pin vise comes with two double end collets for 0 to 3.3mm"
capacity. Overall length of pin vise is 3
1
/
2
".
150-PIN-220................................... 10 oz................................4.65
PIN VISES
BENCH BLOCK
Used to support work while flattening or when laying out designs.
Case hardened steel milled smooth. Measures 2
1
⁄
2
" x 2
1
⁄
2
" x 1".
160-AN-125..................................1 lb....................................14.45
BENCH VISE
This handy vise can be either clamped or screwed onto the work-
bench. Has twin guide rods to assure parallel closing and rigidity.
Jaws are 1
1
⁄
2
" wide, and smooth to prevent marring of soft metals.
150-VIS-204................................. 2 lb....................................9.45
V-BLOCK AND CLAMP
This handy bench extension gives the extra support and space
needed for filing, sawing, and drilling. Especially useful when us-
ing jeweler’s saw. Block size: 2
1
⁄
4
" x 7
1
⁄
2
". Clamp fits table up to
1
3
⁄
4
" thick.
150-BPN-105................................ 1 lb....................................7.95
BENCH PIN-ANVIL COMBINATION
For supporting pieces being flattened, filing and laying out work.
Anvil top is smoothly finished. Wood pin measures 4" long by 1
3
⁄
4
"
wide and is replaceable.
160-AN-118.................................................3 lbs 8 oz..........14.95
160-BP-170 Pin only ...... 7"L x 1
3
⁄
4
"W.......5 oz.....................3.95
BENCH PIN IN METAL HOLDER
Holder screws onto edge of work bench, extending working space.
Thumb screw holds wood bench pin which is included. Pin is 5
1
⁄
2
"L
x 2
1
⁄
4
" W.
160-BP-166. ................................. 1 lb. 1 oz...........................9.95
BENCH PIN
Wooden, fits into metal holder above or slot in workbench as a sup-
port for filing, sawing, setting, etc. Pin is 5
1
⁄
2
"L x 2
1
⁄
4
" W.
160-BP-161. ................................. 8 oz...................................2.95
BENCH PIN
BENCH PIN
ANVIL
BENCH VISE
BENCH PIN
WITH HOLDER
V-BLOCK
BENCH BLOCK
JEWELER'S BENCH TOOLS