Interwire Trade Exposition – I-X Centre, Cleveland, Ohio
25
th
-30
th
April 2009
58
➣➢➣
corporate booth for the duration of the
show and will be delighted to welcome
customers and industry friends both
old and new.
Leggett & Platt is North America’s
leading producer of drawn steel wire
with eight plants strategically located
in the United States. The company
specialises in wire transformation,
utilising heat treatment and metallic
coatings throughout the carbon range.
Key wire transformation processes are
annealing, galvanising, metallising, and
oil tempering.
LPWI is a wholly owned subsidiary of
Leggett & Platt, Incorporated, a diver-
sified, Fortune 500 listed corporation.
Using L&P’s global network of offices
and production facilities, LPWI is able
to source and supply most grades
of steel wire for a multitude of
applications.
L & P Wire International – UK
Fax
: +44 1636 672245
:
john.stanaway@leggetteurope.comWebsite
:
www.lpwire.comNiehoff and NENA
Booth 3446
Maschinenfabrik Niehoff and Niehoff
Endex (NENA), Niehoff’s North
American subsidiary, will present the
following equipment:
The new EDR14 high-speed single
wire rod breakdown machine was
developed by NENA especially for the
American market and is designed for
inline operation with high-speed
extrusion lines.
The drawing machine is designed to
operate at speeds up to 45m/s
(9,000fpm). The maximum inlet
diameter for soft copper wire is 8mm
(5/16") and the finish diameter range is
from 1.29–4.12mm (16–6 AWG).
The double-twist stranding machine
DSI631 is used for a wide conductor
cross-section range and a maximum
strand diameter of 8mm. The lay
length can be freely adjusted from
8 to 180mm; the lay length consistency
is less than ±0.5% of the effective
lay length.
The DSI631 and the larger version
DSI1001 are designed to combine
insulated conductors to pairs or quads
and to strand conductor pairs into
LAN cables and other special cables,
either with or without back twist.
The high speed braiding machines of
the BMV series designed for 12, 16 or
24 bobbins can process bare or
plated copper wire, aluminium wire
and stainless steel wire with a
single-wire diameter of 0.05 to 0.3mm
(40–28 AWG) and artificial yarn
and fibres.
Applications include the manufacture
of data, control and coaxial cables,
hollow braids for battery cables,
stranded braids, and mechanical
reinforcements for pressure hoses and
medical catheters.
The DSA ‘Niehoff rewinding machines
System Hacoba’ are automatic high-
speed machines, which spool wires
from single and multiwire spools onto
braiding bobbins.
At the show the DSA will operate inline
with an EDP801, a newly redesigned
multiwire pintle type payoff for tension
control during accelerations and
decelerations.
It is available for operation with
high-speed double twist bunchers, and
can be built with a lift table to
accommodate spools with smaller
flange sizes.
Maschinenfabrik Niehoff GmbH –
Germany
Fax
: +49 9122 977 155
:
info@niehoff.deWebsite
:
www.niehoff.deNiehoff Endex North America Inc –
USA
Fax
: +1 856 467 0584
:
sales@niehoffendex.comWebsite
:
www.niehoff-usa.comPan Chemicals
Booth: Italian pavilion
Pan Chemicals is a major producer of
wire drawing lubricants, using its
expertise, specialised products and
technical service to help customers to
improve their production technology
and efficiency.
Products include:
Panlube
•
®
S – dry drawing lubricants
for low carbon steel wire, plating
quality wire, welding wire, CHQ,
high carbon steel wire, drawing
after galvanizing and high alloyed
steel
Panlube
•
®
L – wet drawing lubricants,
soluble lubricants, neat oils and
greases
Pancover
•
®
F – phosphate coatings
Pancover
•
®
S – non-reactive pre–
coatings for stainless steel, carbon
steels and alloys
Panchem
•
®
– auxiliary products for
de-greasing, surface treatment,
fluxes for galvanizing and Galfan
Equipment includes:
Sanding belt descaler
•
Mechanical descalers
•
Rotating pressure die boxes
•
Borax
coating
and
drying
•
equipment
High-tech
die
reconditioning
•
equipment
Pan Chemicals SpA – Italy
Fax
: +39 0359 77488
:
info@panchemical.comWebsite
:
www.panchemical.comPS Costruzioni
Meccaniche Srl
Booth: Italian pavilion
PS automatic lines can work as either
a slave to the extruder (on line) or as
an autonomous final station. A selector
allows the choice of either the first or
the second system.
PS automatic coiling lines are
equipped with strapping machines,
thermo-shrinking tunnels, boxing
machines, stackers and palletisers.
Model PS 350/8 is suitable for flexible
cables from 1.5mm up to 8mm
diameter or for solid cables from
1.5mm up to 6mm diameter with a
production of five coils, 100 metres
long, per minute. It can also wind flat
cables.
PS 470/16 is suitable for flexible cables
from 5mm to 16mm diameter or for
solid cables from 5mm to 10mm
Niehoff’s BMV16 high speed braiding
m
m
machine