TPT November 2010

42 / 124

40 November 2010 ›
Technology Update
PIPE fusion specialist McElroy has
introduced two new machines. The 1LC
fusion machine is designed for butt fusing
polyethylene pipe sizes from ½" CTS to
1" IPS (16 to 34mm). Engineered as an
alternative to the popular MiniMc™, the 1LC
design uses a more conventional design. Its
heater locates on guide rods built within the
unit, similar to larger diameter machines in
the McElroy family. Pipeliners that own a
MiniMc, which fuses the same pipe sizes,
can use the same inserts within the 1LC.
“The McElroy 1LC puts tried and true
technology into our smallest fusion machine,”
said Chip McElroy, president of McElroy.
“Other standard features that make McElroy
the toughest fusion machines in the world
have also been incorporated into a fusion
machine that we believe will be extremely
popular.”
With a locking cam system, the 1LC
maintains necessary force during the cooling
cycle of the fusion process and incorporates
a 3.8-to-1 mechanical advantage. McElroy’s
patented Centerline Guidance System,
which provides equal distribution of force
around the joint, is included in the design,
as are serrated jaws and inserts to keep the
pipe from slipping during fusion.
Two models of the 1LC are available for
sale. One model requires a 100 to 120 volt
input voltage requirement, while the other
uses 200 to 240 volts. Each 1LC includes
the fusion machine, heater, facer, insulated
heater sling, ratchet wrench, screw/driver kit
and case.
McElroy’s other new machine – the
PitBull® 26 fusion machine – can fuse a
variety of pipe sizes in the popular 2" IPS
to 6" DIPS (63 to 180mm) range. Due to
the growing popularity of the size range,
the PitBull 26 was designed to provide
contractors with a machine for their day-to-
day fusion operations.
The design of the machine is similar to
one of McElroy’s best-selling machines,
the PitBull 14, and also features McElroy’s
patented Centerline Guidance System, a
semi-automatic locking cam, hard anodised
aluminium wear surfaces for corrosion
resistance and thrust-bearing-equipped
clamp knobs that minimise the torque
required to clamp and round the pipe for
fusion operations.
Three PitBull 26 machine models are
available: a 6" DIPS with a 100 to 120 input
voltage requirement; a 6" DIPS with a 220
to 240 input voltage requirement; and a
180mm unit with 220 to 240 input voltage
requirement. Each PitBull 26 machine
comes with the fusion machine, facer,
heater, insulated heater stand, facer stand,
6" IPS insert set and a screw/driver kit.
McElroy – USA
Fax: +1 918 831 9256
Email:
Website:
Two new fusion machines
The PitBull 26