Background Image
Table of Contents Table of Contents
Previous Page  91 / 120 Next Page
Information
Show Menu
Previous Page 91 / 120 Next Page
Page Background www.read-tpt.com

S

eptember

2016

89

T E CHNOLOG Y

Inspection, testing and quality control

CONTRÔLE Mesure Systèmes (CMS)

is a specialist in non-destructive testing

and, with a complete NDT range of

products in eddy current and ultrasonic

methods, can supply solutions for most

industrial applications.

CMS’s product line is designed to meet

inspection, testing and quality control on

both ferrous and non-ferrous products,

including steel, copper, alloys, carbon

steel, stainless steel and aluminium.

Applications in tube, bar, pipe and wire

inspection include surface flaw detection

by RotoETscan eddy current rotating

head; internal and dimensional flaw

detection by RotoUTscan ultrasonic

rotating head; tube inspection with

product in rotation; full body and/or weld

of welded tube inspection; full body and/

or ends of non-welded tube inspection;

defect detection on double wall tubes;

and heat treatment, hardness and

coating verification and measurement.

CMS will exhibit at Tube China 2016

from 26 to 29 September at stand

E1D20.

Contrôle Mesure Systèmes

– France

Email:

contactcms@cmseddyscan.com

Website:

www.cmseddyscan.com

PP-R welding solution

RITMO’S Basic is a range of welding

machines for PP-R and other plastic

pipes such as HDPE, PB and PVDF, for

industrial or civil use. The Italian-made

machines are designed for precision

and ease of use, and follow all of Ritmo’s

quality standards.

Basic 160 is a small welding machine

with a working range of Ø 40 to 160mm

(1" to 5" IPS), while the largest of the

line – Basic 355 – is for 125 to 355mm

(4" to 14" IPS).

Basic 160 includes a machine body

built with a supporting frame, four

clamps and two hydraulic cylinders with

fast, non-drip coupling connections.

The Teflon-coated (PTFE) heating

plate has a built-in independent

thermometer to check the working

temperature, and a high-precision

electronic

thermoregulator,

‘Digital

Dragon’, (±1°C) with digital display and

regulating buttons. The system includes

LED indicators to show if the machine

is working normally (live tension and

working temperature), and to alert the

user to contingent probe failures or

temperature anomalies. An extractable

electric milling cutter, to face the heads

of the pipes and fittings, includes a

safety micro-switch and a thermal circuit

breaker. The electro-hydraulic gear

case is protected from crashes and

atmospheric corrosion by a plastic box.

The machine includes a control lever

to open and close the clamps, maximum

pressure and discharge valves (also

useful for the ‘dual pressure’ welding

process), hydraulic connection hoses

with fast couplings, and a timer to check

the warming and welding time. The

machine is pre-set for the connection of

the electronic controller ‘The Inspector’.

Basic 160 is able to weld fittings such

as elbows, tees, Y-branches and flange

necks, and is available in 110V and

230V versions.

RITMO SpA

– Italy

Email:

info@ritmo.it

Website:

www.ritmo.it

Basic 160

Machines from the Basic range at work on the job site