Background Image
Table of Contents Table of Contents
Previous Page  31 / 68 Next Page
Information
Show Menu
Previous Page 31 / 68 Next Page
Page Background

7

housing…

ROBUST

IKHAYA

EEZYBUILT

LEPA

trusses with light weight cladding

(12kg/m²). Insulated ceilings are

always installed as well as conven-

tional windows, doors and services.

This system is Agrément Certified.

LIGHT STEEL FRAME

Light steel frame building consists

of structural wall frames and roof

trusses, manufactured from cold-

formed light gauge galvanised steel

sections.

Exterior cladding consists of a single

skin brick wall (veneer) a weather

resistant board of reinforced plaster,

fixed to the wall frames. In some

cases, cladding consists of prefabri-

cated (modular) panels.

The Hub has a number of ex-

amples of this type of construction

with its various claddings.

STEEL MESH

The Robust system has a concrete

wall appearance in which the fin-

ished state, but is neither formwork

based poured concrete, nor pre-cast

into panels. Robust wall panels are

manufactured from 0.4 mm mild

steel sheeting, which are punched,

expanded and formed into a zig-zag

profile. Panels are erected verti-

cally and stiffened transversely with

2.5 mm wires spot welded to each

face at 200 mm centres. Mortar is

applied to panels either by hand or

usingmechanical packing. Mechani-

cally applied mortar may be applied

wet (pumped) or dry (gunited), with

hand-packed mortar and mechani-

cally applied wet mixes. Both faces

of core are plastered. Basically, it is

a slab which is vertically applied. In

non-corrosive environments plas-

ter will have a 28 day compressive

strength of 10 MPa, however, in

severely corrosive environments

higher characteristic strengths may

be specified.

Where the Robust system is used

for example, in the Southern Coastal

condensation area, insulated ceilings

are installed and exterior walls are

given an additional external finish

of Pratliperl plaster.

The walls must be 130 mm thick,

excluding 13 mm thick additional

plaster on the outside. For the foun-

dation and floor system, conven-

tional cast in situ concrete surface

beds are used with thickened edge

beams and thickening under internal

walls. Similarly, conventional roof

construction and roof coverings

are used. This system is Agrément

Certified.

Continued

▶▶▶