Background Image
Previous Page  31 / 44 Next Page
Information
Show Menu
Previous Page 31 / 44 Next Page
Page Background

CAPITAL EQUIPMENT NEWS

AUGUST 2015

29

The production line sees between 10 and 14

buses a month roll out depending on spec-

ification and finishing. All of its production

bays are fully accounted for until the end of

the year which means any disruptions will be

far-reaching in terms of cost.

The genset installed in February 2015

at Busco’s production facility produces

280 kVa which, as Van Zyl points out, is

probably larger than what is required, but

he much prefers a unit that performs well

within its capability than one operating

under stress – which severely affects fuel

consumption. The entire facility can be run

off the genset when required including the

production line’s biggest power user – the

welding section.

Van Zyl chose not to electronically automate

the switch from supplied power to genset

power and rather switch the sources man-

ually as this allows for better fuel economy

as the unit then only runs when it is required

and not every time the power cuts – for in-

stance during the night or on a Sunday.

“Our genset currently runs for anywhere be-

tween six and eight hours a week but we

have also required it to run for periods of

eight hours straight on the odd occasion.

My initial predicative calculations indicated

that it would achieve an efficiency of around

22 litres per hour and I’ve been pleasantly

surprised that we are actually achieving a

much lower figure of 16 litres per hour,” ex-

plains Van Zyl.

b

Willie van Zyl, managing member of Busco Marketing with Rune Walter, export

sales manager: Scania engines and gensets.

Genset type

SG280

SG280

Application

Prime

Standby

50 Hz, 380-415 V, 200/115 V

250 kVa

280 kVa

200 kWe

225 kWe

60 Hz, 440-480 V

280 kVa

315 kVa

225 kWe

250 kWe

60 Hz, 200/115 V

270 kVa

300 kVa

215 kWe

240 kWe

*Ratings at 0.8 pf

A Scania bus rolls off the assembly line.

Scania gensets are available in two

variations to suit installations.

Prime power:

For continuous operation and

unlimited yearly operation time at varying

load. A 10 % overload power can be supplied

for one hour in a twelve hour period. These

units are available for fuel optimised and EU

Stage IIIA compliant gensets.

Standby power:

This rating is for the supply

of continuous electrical power (at variable

load) in the event of a reliable utility power

failure. No overload on these units is

permitted. These units are available for fuel

optimised gensets.

HEAVY DUTY TRANSPORT