2016 Product Catalog

48 / 572

46 | Phone 800.831.5904 | Fax 800.285.7054
LASERTECHNOLOGY & EQUIPMENT
CareerTech Ed / STEM
LASERTECHNOLOGY & EQUIPMENT
Digital Photometer
Industrial Fiber Optics Measures power levels
of laser beams, demodulating optical signals for
audio applications and solar experiments. Offers
4 scale measurements from 20 microwatts to 20
milliwatts. Battery power, portability and adjust-
able detector height offers flexibility.
Analog output to 2 banana jacks is a conditioned electrical voltage that is
directly proportional to light incident upon the photodetector with a fre-
quency range up to 10 kHz. This allows it to be connected to a strip chart
recorder for solar monitoring, oscilloscope for observing time-dependent
optical signals or to an amplified speaker for voice transmission. Meter will
also act as an audio receiver to demodulate laser signals.
• 4 ranges • All solid state detector & electronic design
• Calibrated at 632.8 Nm • Sensitive to visible & IR light
Includes metal optical stand, manual, two 9V batteries & case.
Stk. Mfr. Price
IFPM $252.00
Laser Communication Kits
Industrial Fiber Optics Versatile laser with
very wide electrical modulation capacity and
digital audio jack (w/low 100 Hz for laser audio
communication experiments) and RF video jack
(w/70 Mhz for simultaneous transmission of color
video picture & sound) allow students to perform dynamic optical communi-
cation demonstrations:
• Voice communication • AM/FM radio transmission
• Video from camcorder • RF video from VCR or DVD player
• Digital line-of-sight computer links
Laser can also conduct regular laser, optics and fiber optic experiments
showing the properties of:
• Tyndall's light-guiding-in-water experiments
• Critical angle determination in materials • Light shows
• Perimeter security using laser beams • Light polarization
• Convergence/divergence of lenses • Refraction & reflection
• Speed of light measurement • Brewster's angle measurements
Visit our website for more information.
Includes highly-linear 0.8 mW 635 nm Class II diode lab laser, optical RF
video receiver, interconnecting cables, power adapters & manual.
Video Project Demonstrate TV picture and sound transmitted over
a laser beam.
Stk. Mfr. Price
IF-UL08-635X $510.00
Communication Kit Laser project capable of demonstrating the
versatility of data transmission with light. Also includes microphone,AM/
FM radio, patch cords & audio receiver.
Stk. Mfr. Price
IF-UL08-635Y $600.00
Student Lab Starter Set
Industrial Fiber Optics Contains all the lenses and
optic accessories necessary to perform a large number
of demonstrations and student labs.
Includes Helium-neon Laser, Hard-seal, Class II 0.8
mW (ML810) Photometer, 8-range (45-230) Laser
Optics Lab (45-600).
Stk. Mfr. Price
MW45-810 $964.00
Laser Optics Lab
Industrial Fiber Optics Laser optics lab con-
tains more than 30 optical parts and accesso-
ries. With the lab components and instructions,
students can:
• Measure wavelength of light using techniques of Young, Michelson & Lloyd
• Constrict optical levers to detect & measure movements so small they
are almost imperceptible to the human eye
• Test a lens for defects, collimate light & check vision
• Capture light in an arcing water jet or a glass fiber & investigate fiber op-
tics phenomena
• View a hologram, observe interference rings & measure the diffraction
patterns with a ruler
• Determine index of refraction of a liquid or transparent solid by measur-
ing bend in intense laser beam as it enters or leaves material
• Investigate reflection, refraction & critical angle
• Study characteristics of light: wavelength, interference, diffraction & polarization
Includes optics bench system (metal component carriers that attach mag-
netically to steel optical table), 3 lenses, 4 mirrors, coated beam splitter, tri-
angular prism, beam spreader, air wedge, transmission hologram, diffraction
mosaic, diffraction grafting, fiber optics light guide, pair of glass interference
plates plus polarizing & color filters, plus 68-page manual.
Stk. Mfr. Price
45-600 $191.00
Helium-neon Lasers
Industrial Fiber Optics Provides 20,000
hours of continuous operation. For individual
student lab work or hands-on group demon-
strations. Rugged extruded aluminum housing
contains laser tube and all power supply
components. Has standard 1/4" camera-type threaded hole in bottom for
tripod or optical bench mounting. Threaded optics mount over front ap-
erture to facilitate mounting lenses, filters or collimators. Slide shutter over
front aperture blocks beam without having to shut off power (as required
by US CDRH) .
• Rear end cap w/power switch & indicator lamp, fuse holder & line cord
w/3-prong grounded plug
• Hard-seal laser tube ensures long, dependable life
• Solid-state power supply mounted on printed circuit board
• Labels & safety features to meet all US CDRH regulations
• Shock-resistant mountings • Full-length rubber strips along bottom
Class II Laser 0.5 mW Ideal for individual work in the student
laboratory or for group demonstrations. Power requirements: 105-
125VAC, 30 watt.
Stk. Mfr. Optical Output Power Price
ML800 .05 mW $468.00
Class II Laser 0.8 mW Same as ML800 but w/output power of
0.8 mW. Beam is visible in bright or semi-darkened room of average
size, but to see fine details in diffraction pattern or make holograms or
precise intensity measurements of laser output, a relatively dark room is
suggested.
Stk. Mfr. Optical Output Power Price
ML810 .08 mW $480.00
Class IIIA Laser 2.0 mW For shorter exposure times in holography,
better fringe visibility for interferometry, greater irradiance for long
distance communications & for large area illumination. Excellent beam
power stability w/less than 5% variance after warm up.
Stk. Mfr. Optical Output Power Price
ML820 2.0 mW $399.00