Previous Page  78 / 84 Next Page
Information
Show Menu
Previous Page 78 / 84 Next Page
Page Background

new products

The PCIe-8398 host interface card communicates over

a fully transparent PCI Express Gen 3 x16 link to either

the single-port PXIe-8398 or dual-port PXIe-8399 remote

control module to offer up to 13.7 GB/s of sustained data

throughput. Engineers can use the second port on the PXIe-

8399 to daisy chain additional chassis, making it possible to

directly interface multiple PXI Express chassis to a single

host computer, whether it is a desktop or rack-mount PC.

The PXIe-8394 bus extension module supports peer-to-

peerstreamingupto6.8GB/sbetweenchassis-separated

instruments with PCI Express Gen 3 connectivity such

as the second-generation vector signal transceiver. In

addition to multichassis systems, the PXIe-8394 allows

high-throughput communication with peripheral devices

like RAID data storage arrays or theATCA-3671 FPGA

Module for ATCA. These peripherals typically operate

with substantial data sets and can benefit from utilizing

the latest PCI Express interfaces.

This new family of PXI remote control and bus extension

modules complements the already-released PXIe-

8880 embedded controller and PXIe-1085 24 GB/s

chassis, both of which also feature PCI Express Gen

3 connectivity. This high-bandwidth portfolio of chassis

and controllers is an important part of the NI ecosystem

that engineers can use to build smarter test systems.

These test systems benefit from more than 600 PXI

products ranging from DC to mmWave and feature

high-throughput data movement using PCI Express bus

interfaces and sub-nanosecond synchronization with

integrated timing and triggering. Supported by a vibrant

ecosystem of partners, add-on IP and applications

engineers, the NI platform helps dramatically lower

the cost of test, reduce time to market and future-proof

testers for tomorrow’s challenging requirements.

Read this white paper to learn more about how NI’s PCI

Express Gen 3 chassis and controller offerings help

engineers build smarter test and measurement systems.

Surface-Mount Intelligent Low-Power

Modules from STMicroelectronics Save Space

in Energy-Efficient Motor Drives

STMicroelectronics has added five space-saving

surface-mount intelligent power modules (IPM) to its

SLLIMM™-nano family, giving the choice of IGBT

or MOSFET outputs for in-motor or other space-

constrained drives all the way from very low power

ratings up to 100W.

The new modules deliver high conduction and switching

efficiency, especially in hard-switching circuits at

frequencies up to 20kHz. The integrated gate-driver

circuitry is engineered to minimize electromagnetic

emissions (EMI) by managing switching voltage and

current slopes (dV/dt, di/dt). The thermally efficient

package enhances reliability and allows heatsink-free

design, while 2.7mm creepage and 2.0mm clearance

ensure safety isolation within the compact dual-inline

SMD footprint. The module pin configuration is optimized

to simplify circuit-board layout.

Awide range of domestic and industrial appliances, such

as small fans, roller shutters, refrigerator compressors,

dishwashers, draining and recirculation pumps, and

general low-power motor drives, can benefit from the

small size, high energy efficiency, excellent reliability,

and safe, low-noise performance of ST’s new IPMs.

Extra features integrated alongside the gate driver and

500V MOSFET or 600V IGBT/freewheel-diode array

include an uncommitted operational amplifier and a

comparator that let designers implement advanced

current sensing and over-current protection with minimal

external components. Smart shutdown with high-speed

fault detection, interlocking, and under-voltage lockout

are all built-in, and integrated bootstrap diodes simplify

powering the module’s gate-control circuitry.

The new SLLIMM -nano power modules, comprising the

STIPNS1M50T-H, STIPNS2M50T-H, STIPNS2M50-H,

STGIPNS3H60T-H, and STGIPNS3HD60-H, provide

a choice of 1A, 2A, or 3A current rating (at 25°C). All

are packaged as NSDIP-26L fully-molded dual-inline

surface-mount devices. Engineering samples are

available now and volume production will commence

in Q4 2017. Pricing starts at $5 for 1000 pieces of the

STIPNS1M50T-H.

78 l New-Tech Magazine Europe