TPT March 2015

46 / 108

Technology News
44 March 2015
 EXCELLENT QUALITY
 INNOVATION
 EXPERI ENCE FOR MORE THAN 100 YEARS
 GLOBAL NETWORK
 FOR THE BEST RESULTS IN CUTTING
 ANY SIZE OF BLADE FOR ALL MACHINES
MADE IN JAPAN
since 1910
TCT-CIRCULAR SAW BLADES FOR CUTTING BAR/TUBE/PIPE
TENRYU SAW MFG. CO., LTD. | Japan, Fukuroi,
TENRYU EUROPE GMBH | Germany, Aalen,
TENRYU AMERICA INC. | USA, Hebron KY,
TENRYU SAW DE MEXICO, S.A. DE C.V. | México, Silao, Guanajuato,
TENRYU (CHINA) SAW MFG. CO., LTD. | P.R. of China, Langfang, Hebei,
TENRYU SAW (THAILAND) CO., LTD. | Thail., Amiphur P., Rayong,
TENRYU SAW INDIA PVT. LTD. | India, Neemrama, Rajasthan,
. . . ASK TENRYU !
Clamping technology
THE conditions and requirements in
manufacturing technology are becoming
increasingly complex, and include
factors such as flexibility, shorter set-
up and production times, increase of
operational safety and efficiency. At the
same time, users are looking for simple
and cost-effective solutions.
In the field of mechanical and hydro-
mechanical clamping elements, Enemac
offers flexible and reliable clamping
technology with various power clamping
systems and hydro-mechanical spring
clamping systems.
The range runs from controlled
clamping with torque handle ESBS/
ESBT with a nominal clamping force of
up to 40kN, to power clamping nut ESB
with up to 200kN, and type ESD with up
to 180kN. For these products, relatively
low torques are converted by an internal
gear ratio in high axial forces.
In the case of the
power clamping
screw ESS, the
tightening torque
is converted by a
wedge clamping
system in clamping
forces up to 250kN.
Thread sizes from
M 36 to TR 100 are
available.
With the ‘spring
clamping cylinders’,
a combination of
disc spring and
hydraulic, clamping forces up to 350KN
are available. The hydraulic supply
is only required during installation
and removal of these products; in
operation, the axial force is kept purely
mechanically, by a disc spring assembly.
This clamping technology offers
an alternative to simple workholding
equipment such as clamps and brackets,
as well as to semi- and fully automatic
clamping elements, with their elaborate
power supply and control systems.
Especially in the manufacturing
process of steel parts in presses and
punches, the clamping elements
provide a high degree of safety through
low hand forces during tightening of the
necessary tools and equipment.
The clamping systems are suitable
both for original equipment and as
retrofit items.
Enemac GmbH – Germany
Fax: +49 6022 22237
Email:
Website:
Clamping
elements
from
Enemac