924 / 1618
5/50
Hand Tools
5
Design:
Handy, small shape. Made of steel, forged.
Polished head.
Blades with two sharpened
grooves for cutting thin or thick single- and two-core cables. Handles with multi-component
plastic covers,
insulated up to 1000 V according to IEC 60900, DIN EN 60900,
VDE 0682/Part 201.
Application:
For squash-free cutting of copper and aluminium cables.
Note:
Not suitable for steel wire, steel-reinforced cable, aluminium alloys and hard-drawn
copper conductors.
Order
No.
Cutting values ∅
mm
5386
Cutting values
mm
2
Length
mm
0165
8
35.70
16
165
0200
12
40.00
m
25
215
(W523)
VDE cable shears KT 8
Design:
Made of chrome-vanadium electric steel, oil hardened and tempered. With hardened,
precision-cut blades, cuts smoothly and cleanly without squashing. With clamping protection
and adjustable screwed hinge.
Application:
For single- and multi-wire copper and aluminium cables.
Note:
Not suitable for steel wire or wire cable.
Order
No.
Cutting values ∅
mm
5392
5396
5397
Cutting values
mm
2
Length
mm
0501
27
94.20
–
–
150
500
0600
27
–
166.00
191.00
150
600
(W525)
(W525)
(W525)
Cable shears
5392
5396
5397
5392
Burnished head.
Low effort due to good leverage and
special cutting edge geometry. Arms made of high-
strength aluminium pipe. Handles with multi-component
plastic covers.
5396
Polished head.
Favourable transmission ratios due to
toggle. Arms made of steel pipe. Plastic-covered handles.
5397
Polished head.
Favourable transmission ratios due to
toggle. Arms made of steel pipe. Plastic-coated handles,
insulated up to 1000 V, according to IEC 60900,
DIN EN 60900, VDE 0682/Part 201.
Design:
Blade head made of special grade tool steel (interchangeable), hardened and
tempered in oil.
Burnished head.
With clamping protection and adjustable screwed
hinge. Easy and clean cut due to the new blade shape, less effort required due to optimum
transmission. Arms made of high-strength aluminium oval pipe,
arm length adjustable
.
The
articulated joint has different settings
to allow for working in narrow spaces and to
optimise the lever arm in the case of fully pulled-out arms. Handles with multi-component
plastic covers.
Application:
For single- and multi-wire copper and aluminium cables.
Note:
Not suitable for steel wire, hard-drawn copper conductors
or steel wire.
Order
No.
Cutting values ∅
mm
5394
Cutting values
mm
2
Length
mm
0560
38
205.50
280
550–770
(W525)
Cable sheers with telescopic arms
Cable shears
924