580-581 / 2239
Relevant references
Allahverdi, M., A. Nisbet, et al. (1999). "An evaluation of epoxy resin phantom materials for megavoltage
photon dosimetry." Phys Med Biol
44
(5): 1125-1132.
Araki, F., Y. Hanyu, et al. (2009). "Monte Carlo calculations of correction factors for plastic phantoms in
clinical photon and electron beam dosimetry." Med Phys
36
(7): 2992-3001.
Fujita, Y., N. Tohyama, et al. (2010). "Depth scaling of solid phantom for intensity modulated radiotherapy
beams." J Radiat Res
51
(6): 707-713.
Hill, R., Z. Kuncic, et al. (2010). "The water equivalence of solid phantoms for low energy photon beams."
Med Phys
37
(8): 4355-4363.
Ma, C. M., S. B. Jiang, et al. (2003). "A quality assurance phantom for IMRT dose verification." Phys Med
Biol
48
(5): 561-572.
Ma, C. M. and J. Li (2011). "Dose specification for radiation therapy: dose to water or dose to medium?"
Phys Med Biol
56
(10): 3073-3089.
McEwen, M. R. and D. Niven (2006). "Characterization of the phantom material virtual water in high-
energy photon and electron beams." Med Phys
33
(4): 876-887.
Ramaseshan, R., K. Kohli, et al. (2008). "Dosimetric evaluation of Plastic Water Diagnostic-Therapy." J Appl
Clin Med Phys
9
(2): 2761.
Seuntjens, J., M. Olivares, et al. (2005). "Absorbed dose to water reference dosimetry using solid phantoms
in the context of absorbed-dose protocols." Med Phys
32
(9): 2945-2953.
Tello, V. M., R. C. Tailor, et al. (1995). "How water equivalent are water-equivalent solid materials for output
calibration of photon and electron beams?" Med Phys
22
(7): 1177-1189.