Valve systems
www.adhesivedispensing.co.uk12
Rotary table
Part Code
Type
ADL-300
220V AC
ADL-310
110V AC
PneumaƟc Dispenser
Bench top dispenser for adhesives, fluids & gels to circular products under 152mm dia. This rotary table
applies a circular paƩern on areas that are difficult to access. The ƟlƟng Z-axis allows dispensing on an
angle. Fully adjustable rotaƟon speed, circle diameter & dispense Ɵme. Dispense from barrels, mounted
on the Z-axis. The Z-axis Ɵlt is easily adjusted.
Hand operated valve for applying low to medium viscosity fluids as cyanoacrylates, solvents, UV cure,
anaerobic, primer & acƟvators. Maintenance free replaceable tubes. Takes a direct feed of fluid from a
syringe, cartridge or pressure pot.
Man al Pinch Valve
Part Code
WeƩed Parts
TS1201
Polyethylene
Manual Lever Valve
Hand operated diaphragm valves for the applicaƟon of low to medium viscosity fluids such as cy-
anoacrylates, solvents, inks, UV cure, anaerobic, primers and acƟvators. Takes a direct feed of fluid
from a syringe, cartridge or pressure pot. UHMW/ Teflon for Cyanoacrylates, Delrin for UV cure.
Part Code
WeƩed Parts
TS5623HU
UHMW
TS5623HD
Delrin
TS5623HT
Teflon
Manual Lever Valve
Part Code
WeƩed Parts
ADL-200CAM
Teflon
Hand operated diaphragm disc valve for the applica-
Ɵon of low to medium viscosity fluids such as cyanoacrylates, solvents, inks, UV cure, anaerobic, pri-
mers and acƟvators. Takes a direct feed of fluid from a syringe, cartridge or pressure pot.
Typical ApplicaƟons:
UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..
Typical ApplicaƟons:
UV cure, Cyanoacrylates, solvents, anaerobics, glues, inks..
Typical ApplicaƟons:
UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..
Typical ApplicaƟons:
UV cure, Cyanoacrylates, solvents, anaerobics, glues, gels..
Length: 127mm
Width: 34mm
Max Pressure: 60psi
Viscosity: 1-45k cps
Z Travel: 50mm
Speed: 300 RPM
Max Pressure: 100psi
310 x 215 x 85mm
Length: 159mm
Width: 45mm
Max Pressure: 50psi
Viscosity: 1-5k cps
Length: 88mm
Width: 27mm
Max Pressure: 70psi
Viscosity: 1-50k cps