![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0017.jpg)
Valve systems
16
www.adhesivedispensing.co.ukMin Shot: 0.01ml
Length: 115mm
Width: 35mm
Weight: 418g
Part Code
WeƩed Parts
AD324D
304 Stainless Steel
Epoxy Mixing Valve
Stainless steel double air acƟvated dispense valve for mixing two part materials such as epoxies, sili-
cones and polyurethanes. Part A and Part B are fed under pressure to the valve, it delivers them into
the staƟc mixer nozzle where they are mixed. This valve mixes raƟos 3:1 or under. Adjustable.
Stainless steel double air acƟvated dispense valve for mixing two part materials such as epoxies, silicones
and polyurethanes. Part A and Part B are fed under pressure to the valve, it delivers them into the staƟc
mixer nozzle where they are mixed. This valve mixes raƟos 2:1 or under. Adjustable.
Epoxy Mixing Valve
Part Code
WeƩed Parts
AD1919
304 Stainless Steel
Min Shot: 0.01ml
Length: 160mm
Width: 40mm
Weight: 235g
Min Shot: 0.01ml
Length: 160mm
Width: 40mm
Weight: 235g
Typical ApplicaƟons:
Rapid dots or controlled beads of 2-part materials less
than 2:1 mix raƟo such as epoxies, silicones and PU’s.
Typical ApplicaƟons:
Fast repeat dots of pastes, gels and liquids. Up to 600
shots per minute.
Stainless steel double air acƟvated dispense valve for medium viscosity pastes and gels. Adjustable flow
control stroke. A reliable double acƟng valve, requires air pulse to open and air pulse to close. Use the
dispensing controller part
VCE1195N
. Stainless steel weƩed parts. 1/4” threaded inlet.
Paste Dispensing Valve
Part Code
WeƩed Parts
AD3075
304 Stainless Steel
Typical ApplicaƟons:
Rapid dots or controlled beads of 2-part materials less
than 3:1 mix raƟo such as epoxies, silicones and PU’s.