EoW September 2008

45 / 100

EuroWire – September 2008 43
english technology news
Cable clamps for system builders
Polyamide cable clamps from M Buttkereit
Ltd are designed to hold and support a
range of different power cables for various
applications.
The clamps are moulded from black
polyamide 6GV and are suitable for use
inside or outside, even in hostile operating
environments. They are also resistant to
grease, oil, UV and ozone radiation, and
can accommodate cable loads up to 600A
and function in temperatures ranging from
–40° to +120°C.
KHF single aperture clamps come in a wide
selection of sizes, and are suitable for single
insulated cable diameters ranging from
16mm up to 100mm. Clamp footprint is
compact, ranging from 66mm x 21mm, up
to 182mm x 80mm.
Larger clamps are also available to accept
multiple cables. These can be configured
in three-cable triangular or four-cable
diamond arrangements within a single
enclosure aperture. The triangular cable
formation emits a magnetic field level of no
more than 100 micro Tesla at 20cm radius,
and all clamps are rated to a short circuit
resistance load of 25kN.
The K series clamp is designed for use
with insulated power cables installed
in series or multiple cable layers. These
can be arranged in a wide combination
of configurations, for example, with two
blocks to accept 3-4 cables (10-32mm
diameter), in flat runs on either horizontal
or vertical planes, or with three tiered or
layered blocks to accept 6-8 cables.
Polyamide cable clamps can be supplied
for cable centre settings of 38, 41, 44 or
65mm, with optional clamp sizes to provide
alternative cable row spacing. All clamps
come with mounting plates incorporating
stainless steel stud bolts, nuts and washers.
MButtkereit Ltd – UK
Fax: +44 161 969 5419
Email:
Website:
New and value for money from Burster ▲ ▲
Reaching the
people you want
to reach . . .
Polyamide cable clamps fromMButtkereit ▲ ▲